Supplier 110V 4kg Portable Electronic Mini Gold Smelting Furnace

Supplier 110V 4kg Portable Electronic Mini Gold Smelting Furnace

Temperature range is from 0 Degrees Fahrenheit to 2102 Degrees Fahrenheit (1150 Degrees Celsius) all Digitally controlled by you. It takes 10-15 Minutes to first warm up depending on the metal your melting and 10-15 minutes to fully melt your metal depending on the form of material. Shot or small parts melt faster than large bars or blocks. 

The world's workhorse for melting metals. Designed to be hand-held for easy pouring directly to the flask. Also used for reclaiming, alloying and refining metals.

Features found on all JC ElectroMelt furnaces:

• Safety lid switch
• Built in pyrometer
• Graphite crucible
• Graphite stirring rod
• Extended life heating element 
• Available in 220 V
• 

JC Furnace Automatic thermostat controls monitor the precise temperature you require, regardless of metal quantity. The furnace holds temperature within ±5°F (±3°C) to a working temp of 2102°F (1150°C), reducing metal temperature overshoot and protecting against element burnout.
•Digital pressure–sensitive touchpad and LED display.
•CE/UL and CUL–certified with insulated lid.
•Built–in pyrometer and extended–life heating element.
•Graphite crucible and stirring rod.
•Automatic shut off/on.

Advantages of Gold Smelting Furnace Supplier

One Furnace Unit delivery with:

Model JC-K-110-1(110V 1kw) Red,Blue ,Gray color is optional

1-1kg graphite crucible1-crucible tongs.1-replacement fuse.1-insulating heat glasses.1- gloves.

Gold bar melting Operating Process as follows

Step 1 Put gold bar into the crucible.

Step2 Heat up the furnace with 15 minutes

Step3. Take out the Melting crucible from the furnace,then put it on tray.

Step4.Pour slowly the gold liquid from the crucible.

Step5.Wait the liquid cooling in the mould within several seconds.

Gold Smelting Furnace Supplier Instruction

The furnace has two on/off switches: the GREEN switch turns on the temperature thermostat allowing you to set the desired melting temperature.

The RED switch turns on the heating element to start the melting process.

The thermostat has two digital read-outs: the bottom readout (SV) displays the setting you enter into the furnace. The top read-out (PV) displays the actual temperature inside the crucible during operation.

To set the desired melting temperature, turn on green on/off switch. Wait a few seconds; the bottom (SV) readout should show the default temperature setting of 1950°F.

To change the temperature setting, simply press the left arrow key to move the cursor to the proper desired digit and press the up or down keys to adjust it up or down. Adjust each digit to the desired setting.

When you are ready, place the metal pieces or grain in the crucible and set the crucible in the furnace. Close the lid.

Press the red button to start the melting process.

When the metal is molten and has reached casting temperature, turn off the red switch. Open the lid and pour the metal into your prepared flask.

Gold Smelting Furnace Supplier Shipping                                  

We can accept T/T,Paypal,Western Union,Escrow,the best and fast way is Paypal.

We choose DHL/Fedex/UPS usually takes about 3-5 working days to the destination

We will send the goods within 3 working days after the full payment has been confirmed

Warranty and Return:

All the products have been tested before ship out.

All products electrical parts have 1 year warranty,including temperature controller,relay, thermocouple,heating elements have 6 months warranty,including chamber,heating coil etc. 

If there is no man-made problems,we will replace or repair for you freely.