Super glue aquarium silicone sealant anti-fungus silicone sealant adhesive for aquarium

Super glue aquarium silicone sealant anti-fungus silicone sealant adhesive for bathroom 

Product Show 

Product Description 

GP Acetic  Silicone Sealant is a high performance sealant suitable for sealing, bonding, repairing and mending of glass and window construction, double glazing in windows, aquariums, shower screens and sanitary ceramics.

Directions for use

1. Ensure all surfaces are clean, dry ad grease-free. Remove all grit, oil, grease, detergents, flaking paint, any loose materials and old sealant.

2. Cut off tip of nozzle and cartridge. Screw on nozzle to cartridge.

3. Fit into chalking gun, applyn surface in steady flow.

4. If required smooth and shape sealant with spatula dipped in mild detergent.

5. Remove excess uncured sealant with a mineral turpentine soaked cloth. Fully cured excess sealant an be removed by trimming with a sharp knife.

Application Tips

To obtain a smooth and neat finish, apply masking tape and remove before sealant cres.

Paint surfaces completely before applying sealant.

Before processing, observe the instructions in our product leaflets and safety data sheets. 

Warning!

Ensure good ventilation if used indoors.

Contact of unvulcanized silicone sealant with eyes and mucous membranes must be avoided as this will cause irritation.

Prolonged contact with eyes, flush with water and consult physician if necessary.

Keep out of reach of children.

Material preparation:

For successful bonding, glass must be clean of all dust, dirt and oil. The cleaned glass should be wiped dry immediately with a clean, lint free cloth or blown dry with hot oil free air.

DO NOT clean glass with soap and water solutions.

Soap residue can cat as a release agent and result in adhesion failure.

Clean glass should be handled with clean, lint free gloves or equivalent only. Oils from hands and fingers can act a release agents resulting in adhesion failure.

Application:

1. Glass must be properly prepared as described.

2. Apply the aquarium sealant to edge surface of the glass to be joined to the non-edge surface. After application of the sealant, the assembled glass components should be tightly placed in a fixture or jig to allow sealant to flow evenly between joined surfaces and to give support during the internal sealing of the aquarium.

3. Selected bead size appropriate for the size of aquarium being constructed. Apply the sealant into the center of the joint formed by the sections of glass.

Tool the sealant immediately after application. Any excess sealant should be removed before the sealant is cured by suing a clean cloth. Cured sealant can be trimmed with sharp blade. Allow sealant to cure at least 7-10 days before adding water and fish. This will ensure full cure and will allow the curing agent to totally dissipate.

Repair application:

The SINOLINK Aquarium Silicone Sealant can be used to repair old or damaged aquariums.

1. Remove all of the damaged sealant, clean area to be repaired with a clean cloth and a suirable solvent.

 Spply sealant as described above and tool.

2. Check repaired aquarium for leaks before adding fish to tank. Fill aquarium with water and let it for several days and check for any signs or leakage.

Colors

About Us

Linqu Yuanyanbg Co.,Ltd Integrates Product independent design sales for the integration of the company.we are the professional manufacture of silicone sealant.our product includes structural silicone sealants and neutral waterproof silicone sealants,are widely used in both indoor and outdoor sealing,bonding and structural assemly of all kinds of large and medium-sized builing curtain wall systems.Through the advanced research and development capabilities,we produce more new products like silicone sealant,for window and door decoration sealant industrial sealant and so on.

We welcome new and old customers from all walks of life to contact us for future business relationships and achiving mutual success.

Product Process

Our Main Market 

Application 

Realted Products

Packaging & Shipping 

FAQ 

Q: What is delivery time?

A: Normally,delivery time of sample order is 2 to 3 days ,standard order is 15 days after deposit. Except for public holidays.

Q: How can you guarantee the quality?

A: We have rigorous quality test system, from raw materials to finished products, the materials must be checked and signed  by QC people.

Q: How long can I get a quote?

A: The quotation can be provided not longer than 24 hours on condition that we know all detailed requirements.

Q: Can I get a sample?

A: Yes we offer free samples. Delivery cost is to be paid by clients.

Q: Can you provide OEM service?

A: Yes,we can produce under your own brandname. Logo and design need to be provided so as to make customized brandname.