The heat pipe solar collector is always connected with existing heating supply device. The selective coating on the inner cover of the vacuum tubes converts solar energy into thermal energy and transfers heat to the heat pipes by aluminum fins. The liquid in the heat pipes changes into vapor which rises to the condenser. The heat then passes through the heat exchanger and the vapor becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat transfer liquid via a copper pipe. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun.
1. High heat collecting efficiency and high temperature output.
2. Quick operation under pressure.
3. Strong freezing resistance,no water leaking problem.
4. Easy installation, convenient maintenance.
5. Completely combined with building, install on wall, roof or ground etc.
1. Outer manifold material: Aluminum alloy or SUS304-2B stainless steel
2. Header Pipe material: Copper
3. Insulation material: Rock wool
4. Heat pipe material: Copper
6. Frame material: Aluminum alloy or SUS304-2B stainless steel
7. Seal material: Stabilized high temperature silicon
8. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating
9. Collector mounting: flat roof or inclined roof
10. Working pressure: 6 bar
11. Testing pressure: 12bar
1, the company professional to do solar collector and solar water heater
2, the quality ofsolar collector and production is the biggest supplier in
3, stable product quality , supply, the good faith management