Super Nitro OBD2 Chip Tuning Box For Diesel Cars Plug and Drive OBD 2 More Power / More Torque NitroOBD2 Interface

Six functions
1 15% increase in power
2 reducing fuel consumption by 20% 
3 More Power 35% 
4 improved throttle lag
5 shift frustrated slowing
6 protect the engine.

SUPERBOX OBD2 improve engine performance.
SUPERBOX OBD2 easy to install. Directly into the car OBD2 connector, SUPERBOX OBD2 adapted from 1996 all models.
It works based on the OBD2 protocol remapping car computer ECU. When driving 200 km road, SUPERBOX OBD2 car will be adjusted according to the driver's habits, has been re-mapped ECU to increase engine performance.
 
What SUPERBOX OBD2 do?
Depending on your driving habits, SUPERBOX OBD2 with a new configuration in the car computer ECU to increase your car's performance.
When you are driving more kilometers / miles, it updates the configuration. Thus, the vehicle keeps increasing power and torque.
 
What is SUPERBOX OBD2 fuel power optimizing means it?
SUPERBOX OBD2 fuel optimization system is the driving force that can insert your car OBD2 connector to increase your car's performance.
When it is inserted into the OBD2 connector, information SUPERBOX OBD2 car computer ECU from receiving and sending data with the ECU.
SUPERBOX OBD2 regulating the boost, the amount of fuel injection timing and pressure, to increase your car's performance.
SUPERBOX OBD2 fuel power optimization apparatus does not exceed the manufacturer's requirements, it is only in the engine tolerances.
SUPERBOX OBD2 find the hidden power of your car, SUPERBOX OBD2 and cars without damage to the engine ECU or computer does not have any negative impact of the depot setting.
SUPERBOX OBD2 permanently without changing any settings. Back in the car's original settings, just unplug from SUPERBOX OBD2 OBD2 connector.
SUPERBOX OBD2 find the hidden power of your car.
- Up to 35% power
- Up to 25% more torque
- Up to 15% fuel savings
SUPERBOX OBD2 is very easy to use.
SUPERBOX OBD2 plug into your car OBD2 connector and turn the ignition for 30 seconds, the engine start.
SUPERBOX OBD2 settings to optimize your car to the best state, even if the parameters are different for each vehicle.
No additional adjustments.
SUPERBOX OBD2 recognize your car and your driving habits, after about 200 km / 150 miles an after,
SUPERBOX OBD2 adjusts itself to your car for an exact match.
SUPERBOX OBD2 work on the basis of the variation signal ECU. As a result, it changes the entire configuration.
The main difference between OBD2 SUPERBOX fuel optimization and mapping power adjustment method is
SUPERBOX OBD2 fuel power optimization unit can be easily disassembled,
Pull back to factory settings.
SUPERBOX OBD2 cheap convenience and security tuning.
Remapping is a permanent change in your car. This is an expensive tuner, you can not delete it.
Engine protection SUPERBOX OBD2 equipped for your car engine is 100% safe.
Chip technology SUPERBOX OBD2 production of printed circuit boards, SUPERBOX OBD2 fuel power optimizing means high quality.
 
Installation and Calibration
1, insert the car key.
2. Find your car OBD2 connector and insert SUPERBOX OBD2.
3, more crucial at this stage to reverse the car keys. (Do not start the car)
4. Press SUPERBOX OBD2 Reset button for about five seconds, release the button, wait a minute about 30-54 seconds (SUPERBOX OBD2 will establish a connection to communicate with the ECU)
5, start the engine.
6, SUPERBOX OBD2 recognize your car and your driving habits, after about 200 km / 150 miles speed, SUPERBOX OBD2 will self-adjust to match your car more fuel-efficient perfect.

SUPERBOX OBD2 diesel: Red
SUPERBOX OBD2 Gasoline: Yellow
Equipment for liquefied petroleum gas

Package Contents:
-SUPERBOX OBD2 fuel power optimizing means
- English user manual