Super Glue, Instant Adhesive, Cyanoacrylate Adhesive

Luoke Cyanoacrylate glue is new developed alpha-cyanoacrylate, locktight equivalents, suitable for fast bonding of most materials such as metal, rubber, plastic, glass, leather, wood, ceramics and other.

Luoke cyanoacrylates characteristics:

• Fast curing within a few seconds
• Single component, easy to use
• High bonding strength
• For bonding a variety of materials
• little odor, low albefaction
• good temperature resistance

LK401

LK401 is a low viscosity, fast curing, single component cyanoacrylate adhesive. It is specifically formulated for difficult to bond substrates and is less dependent on surface moisture for cure speed than other standard CA grades. 20 gram bottle.

Typical Use: Used for rapid bonding of a wide range of metal, plastic or elastomeric materials, particularly suited for bonding porous or absorbent materials such as wood, paper, leather or fabric.

LK403

little odor, low albefaction, moisture resistance, for the bonding of non-precision fitting parts, no need of complex ventilation system.

LK405

LK405 Super Bonder is a single component, low viscosity, moisture cure methyl cyanoacrylate adhesive. It is a universal super glue.

LK406

LK406 is a low viscosity, fast curing, single component cyanoacrylate adhesive. It is specifically formulated for difficult to bond substrates. 20 gram bottle.

Typical Use: Used for rapid bonding of a wide range of metal, plastic or elastomeric materials; particularly suitable for bonding plastic or rubber parts where very fast fixturing is required.

LK410

Rubber toughened,medium strength, medium viscosity, fast curing, good impact resistance and resistance to vibration, heat, peeling. Good gap filling.

Typical Use:

Used for bonding metals, plastics and rubbers that will be subjected to adverse environmental conditions.

LK411

LK411 is a single component high viscosity cyanoacrylate adhesive; it has a moisture cure and is heat, impact and peel resistant. 20 gram bottle.

Typical Use:

Used for bonding rubbers, plastics and metals; suitable for applications where heat resistance is required.

LK414

414 Super Bonder is a single component, low viscosity, moisture cure ethyl cyanoacrylate adhesive with enhanced performance on vinyl and other plastics.

Typical Use: Used for bonding plastics, rubbers and metal; designed for bonding vinyl plastics to themselves or to metals.

LK415

LK415 Super Bonder is a single component, high viscosity, moisture cure methyl cyanoacrylate adhesive.

Typical Use:

Used for bonding plastics, rubbers and metal; particularly suited for bonding metal substrates.

LK420

LK420 Super Bonder is a single component, general industrial grade cyanoacrylate adhesive; it has a low viscosity for penetrating pre-assembled parts and develops strong bonds.

Typical Use:

Used for rapid bonding of a wide range of metal, plastic or elastomeric materials; close mating parts can be aligned and then bonded by penetrating the adhesive into the bond area.

LK454

LK454 is a fast curing, single component gel cyanoacrylate adhesive; the gel consistency prevents adhesive flow even on vertical surfaces.

Typical Use: Used for rapid bonding of a wide range of materials, including metals, plastics and elastomers; it is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric.

LK460

LK460 is a single component, low viscosity, cyanoacrylate adhesive; it has a moisture cure, low odor and low blooming properties.

Typical Use:

Used to bond metals, plastics and elastomers; it is particularly suitable for applications where vapor control is difficult.

LK495

LK495 Super Bonder is a single component, low viscosity, moisture cure, general purpose cyanoacrylate adhesive.

Typical Use:

Used as a general purpose adhesive to bond rubber, metal and plastic parts.

LK480

Rubber enhanced,medium viscosity, resistance to impact, vibration, peeling and heat.

Typical Use: For use on metals, plastics and rubbers.

LK4210

Part of the family of black toughened, thermally resistant instant adhesives. Low viscosity and thermally resistant up to 120 ° C

Typical Use: Close fitting parts.

LK496

LK496 Super Bonder is a single component, medium viscosity cyanoacrylate adhesive with a moisture cure.

Typical Use: Used as a general purpose adhesive for bonding plastics, rubbers and metal; particularly suited for bonding metal substrates.

-- Factory founded in June, 2007 in Ningbo, China

-- Main Products: 

• Anaerobic Adhesive(threadlocking, threadsealing, retaining and gasketing)
• Vacuum Impregnation Sealant(metal casting resin and wood stabilizing resin)
• Pre-applied Fastener Adhesive
• RTV Silicone Sealant
• Acrylic AB Adhesive
• Epoxy Adhesive (epoxy ab glue and epoxy putty)
• Cyanoacrylate Adhesive
• UV Glue

-- Quality Control

• manufacturing from monomers to finished product in our own workship
• passed certifications of RoHS, REACH, SGS, PAHS, POHS, Pb-free, Halogen and etc.

-- Customer

Over the past years we have been exporting to over 30 countries all over the world with positive feedback. We always aim for long term cooperation and regard quality and service as our life. 

"Are you a factory/manufacturer? "
Yes, we are, you will be informed the production status in time. Welcome to visit and have a look at our workshop.

"How do you control the quality?"
We use high quality raw materials and our products are made in our workshop from monomers to finished product.

"Is the glue hazardous?"
All of our glues are non-hazardous chemicals. We have many certifications to prove it.

"Warranty (Shelf Life) of your product? "
most items warranted within 2 years from date of manufacturing unopened at cool(below 26°C), dark and dry place.

"Could you supply free samples?"
Yes, free samples available within 3-5 working days, customers afford freight only, you can use express account to collect it.

"Can we use our own label with our logo/brand?"
Yes, as long as the quantity meets our MOQ for customized production.

"Can we buy bulk pack and repack in our location?"

Yes, totally accepted.

"The price seems high for me, any way to reduce the cost?"

Yes, you can increase the quantity, or choose bigger unit package, or give up customized ideas(MOQ will be lower) and etc.

" What if we receive the cargo and find any items missing or defective?"
Please taking video or photo to showing the problem and contact us ASAP, we will check and give you the best solution soon.

"Can we be your sole agent/distributor in our country/state/city?"
Negotiable if you have a good sales network there.