The function of S087 is to sense the signal of the midhead and then process the signal to convert it into a control signal. With ASIC design, there will be no downtime of the current MCU scheme, and no chip can not be reset due to the lower critical voltage. In power-saving mode, the static current is less than 5uA, and the peripheral application circuit is simple. The IC of the product is packaged with SOT-23-5, which has small volume, few peripheral original boundaries and low system cost.
ASIC Design
In power saving mode, the static current is small (< 5uA)
The peripheral application circuit of the system is simple and the cost is low.
Note: No pull-down resistance is required at the I/O port of G terminal.
Description: When smoking G-terminal output high level signal, when standby G-terminal output low level.
Note: Exceeding the limit parameters specified in the table above will cause permanent damage to the device. It is not recommended that the device be operated beyond the above limit conditions, otherwise the reliability of the device may be affected.
Conditions: VDD = 3.7V, T = 25 C (unless otherwise specified)
China Measurement and Control (Xi'an) Research Institute Co., Ltd. was founded in 2013, headquartered in Xi'an High-tech Industrial Development Zone, is a high-tech enterprise integrating R&D, manufacturing and technical services.
Our main product scope is sensor, transmitters, controllers and flow meters.
Multiple protection, safety and reliable, 360° perfect package
Sea shipping/Land carriage/Air freight/Express(UPS/TNT/FedEx/EMS/DHL)