Copper Heat pipes:
Made of copper tube with sintered copper powder inside. The diameter can be 3 - 16 mm wide with wall thickness of 0.2 - 1 mm. The shape can be round or rectangular by bending or pressing. The heatpipes are widely used in LED lines, Computer lines, Peltier Cooling Systems, Auto cars and so on.
OEM or ODM is welcome.
We can design and produce heat pipes according to customer's requirements. If you have your own designs or samples we can make molds and arrange production according to your product information.?
Product Name: | OEM Customized high Technique Copper Heat Pipes Round Type Heat Pipes With Connector |
Product Size: | Diameter:8mm*382mm(L) |
Material: | copper |
Packaging box size: | 42.5*33*18CM |
Product Weight: | 0.066kg |
Carton/Quantity: | 420pcs/carton |
Grooss weight: | 19.4kg |
Delivery time: | 7 days |
MOQ: | 10pcs |
Shipping method: | By Sea, by air,by expree etc |
company research and development of ultra-thin pipe, the current breakthrough in mass production of 2.00mm;1.7 mm; 1.5 mm; 1.2mm has been broken through and is currently 0.4mm thinPipe has begun mass production, and to ultra-thin VC research and development.
company produces unconventional heat pipe, D9.5mm; D10mm ; D 12mm; D 16mm ; Unconventional heat pipes that break through D22mm are currently being developed. For the trough heat pipe, the length is even 1500mm.
>>Microstructure By means of diffusion bonding, single layer or multilayer copper mesh is connected with each other and formed by close bonding with the cavity. The effect is the same as that of copper powder sintering. Microstructure characteristics of welded copper mesh: 1. The aperture is about 50 μm to 100 μm 2. The upper and lower layers can be made with different pore sizes, and the control structure can meet the efficiency 3. Can be made in the same plane with multiple non-aperture area of the microstructure Using the characteristic: Different microstructures can be made in evaporating zone and condensing zone to meet the needs of the products. The company can use the microstructures and condensing zones in evaporating zone with each other according to the needs.
Angle R (center line) | ||||
Pipe diameter | minimum Angle of R | Suggested R Angle | Minimum bending Angle | Suggest bending Angle |
D3 | 9 | 12 | 90° | 120° |
D4 | 9 | 12 | 90° | 120° |
D5 | 9 | 12 | 90° | 120° |
D6 | 9 | 12 | 90° | 120° |
D8 | 16 | 24 | 90° | 120° |
D9.5 | 20 | 30 | 90° | 120° |
D10 | 20 | 30 | 90° | 120° |
D12 | 24 | 36 | 90° | 120° |
D12.7 | 26 | 40 | 90° | 120° |
Ø6 | thickness | width | Tolerance | Diameter | thickness | width | Tolerance |
2 | 8.41 | +/-0.15 | Ø8 | 2.5 | 11.26 | +/-0.15 | |
2.3 | 8.25 | +/-0.15 | 2.7 | 11.12 | +/-0.15 | ||
2.4 | 8.2 | +/-0.15 | 3 | 10.97 | +/-0.15 | ||
2.48 | 8.18 | +/-0.15 | 3.2 | 10.9 | +/-0.15 | ||
2.5 | 8.16 | +/-0.15 | 3.5 | 10.71 | +/-0.15 | ||
2.7 | 8 | +/-0.15 | 3.8 | 10.58 | +/-0.15 | ||
2.75 | 7.96 | +/-0.15 | 3.85 | 10.56 | +/-0.15 | ||
2.8 | 7.92 | +/-0.15 | 4 | 10.5 | +/-0.15 | ||
2.9 | 7.86 | +/-0.15 | 4.1 | 10.45 | +/-0.15 | ||
3 | 7.84 | +/-0.15 | 4.5 | 10.2 | +/-0.15 | ||
3.1 | 7.74 | +/-0.15 | 4.7 | 10.16 | +/-0.15 | ||
3.2 | 7.7 | +/-0.15 | 5 | 9.96 | +/-0.15 | ||
3.5 | 7.57 | +/-0.15 | 5.2 | 9.85 | +/-0.15 | ||
3.8 | 7.4 | +/-0.15 | 6 | 9.36 | +/-0.15 | ||
3.85 | 7.36 | +/-0.15 | 6.35 | 9.13 | +/-0.15 | ||
3.9 | 7.32 | +/-0.15 | Ø4 | 2 | 5.23 | +/-0.15 | |
4 | 7.3 | +/-0.15 | 2.2 | 5.18 | +/-0.15 | ||
4.1 | 7.23 | +/-0.15 | 2.3 | 5 | +/-0.15 | ||
4.3 | 7.19 | +/-0.15 | 2.5 | 4.96 | +/-0.15 | ||
4.5 | 7 | +/-0.15 | 3 | 4.65 | +/-0.15 | ||
4.8 | 6.86 | +/-0.15 | 3.6 | 4.4 | +/-0.15 | ||
5 | 6.63 | +/-0.15 | Ø5 | 2 | 6.77 | +/-0.15 | |
5.3 | 6.6 | +/-0.15 | 2.3 | 6.6 | +/-0.15 | ||
2.5 | 6.5 | +/-0.15 | |||||
3 | 6.26 | +/-0.15 | |||||
3.5 | 5.95 | +/-0.15 | |||||
4 | 5.63 | +/-0.15 |
1. Q:Are you trading in company or manufacturer?
A:We are the professional manufacturer of heat sink and water cooling plate that has much experiences and strong technique team,automatically and mechanized production
2. Q:Have you exported the goods before and to which regions?
A:60% goods in total has exported abroad,to Japan,India,British,Canada,America and Brazil.
3. Q:How many employees you have?
A:we have about 100 employees,including sales,purchase,engineering,QA,warehouse and production department.
4. Q:If I agree with the design,can you provide the samples we need?
A:Yes,we can.we surely will provide the samples to you for confirmation before mass production.Meanwhile the drawing we could providE if needed
5. Q:What packing you're using and can be assured safety?
A:Every goods are be packed with customized packing ways in normal cartons with tight proof fabric and wooden cartons for great protection,so it is safe during transportation.
6. Q:If we have any questions with products,can you provide the technique and solution?
A:Every products are fully checked before shipping, if there is problems you're facing,please feel free to let us know,we will offer best solution at once.