Number of feeders | 64 |
Number of head | 6 |
Number of camera | 8 |
Number of IC Tray | 6 |
Place height(Option) | 20mm |
Average power | 500W |
Positioning precision | 0.01mm |
The buffer range of suction nozzle | 4.5mm |
Power supply | 220V, 50/60Hz |
Compressed air | 0.5-0.6Mpa |
Drive motor | Panasonic servo motor |
Vacuum source of suction nozzle | High-speed on-off vacuum generator with vacuum breaker |
Maximum circuit board area | 600×455mm |
Maximum travel scope in Z axis | 20mm |
Tape feeder | 8, 12, 16, 24mm and vibration suction (mounting pipe chip) |
Maximum mounting speed | 12000 Pcs/h |
Average mounting speed of actual mounting resistance | 9600 Pcs/h |
XYZ drive guide rail | TBI high-precision reloading linear guide rail |
XY axis transmission | Taiwan TBI high-precision Grinding Miller |
Motion drive system | Panasonic high-speed DSP drive |
Operating system | Full-automatic chip mounter operating system independently |
Developed based on Windows | |
Operating systemand it supports windows xp | |
Win7 operating system | |
Element angle | 0-360°, synchronous rotation during movement |
X/Y operation mode | Intelligent curve of the linear acceleration and deceleration linkage |
MARK point positioning | Full-automatic (the MARK point can be adjust at will) |
Intelligent alarm | Automatic correction, automatic filling, feeding shortage alarm |
Plate entering mode | Automatic connection from left to right in single sections, |
Automatic PCB transfer positioning. /plunger positioning, | |
Manual plate feeding. | |
Visual display | 17-inch industrial control display, 4:3, resolution: 1280 x1024 |
Number of recognition cameras | One Mark recognition camera, four quick-recognition cameras |
And one precise-recognition camera | |
Adaptive mounting scope | Adaptive to 0201, 0402, 0603, 0805, 1206, diode, audion, SOT, QFP |
Within 40*40mm and the pin distance ≥0.3mm | |
(0.5mm center distance) and BGA | |
Product weight | 500KG |
Dimension | 1450*1370*1550mm |