If you are interested in our products, please click here to send me an inquiry, and I will reply you within 8 hours
Technical Parameters | ||||||||
Model | INV-05 | INV-07 | INV-10 | INV-13 | ||||
Plunger diameter | 5mm | 7mm | 10mm | 13mm | ||||
Material | Plunger,Pump cavity set (alumina zirconia) |
Plunger,Pump cavity set (alumina zirconia)
| ||||||
Discharge volume per revolution | 0.17ml/rev | 0.3ml/rev | 0.7ml/rev | 1.6ml/rev | ||||
Filing accuracy/ spinning speed | +/-0.5~1%/0~600RPM | +/-0.5%/0~500RPM | ||||||
Placement angle/ throughput pressure | 15°/0.6MPA | 20°/0.6MPA | ||||||
Maximum suction height | 4m( the product data is measured with water as the medium) | |||||||
Weight |
0.8kg
| 1.3kg |
Model | INV-15 | INV-22 | INV-25 | INV-36 | |||
Plunger diameter | 15mm | 22mm | 25mm | 36mm | |||
Material | Plunger,Pump cavity set (alumina zirconia) | ||||||
Discharge volume per revolution | 2.9ml/rev | 6ml/rev | 12ml/rev | 26ml/rev | |||
Filing accuracy/ spinning speed | +/-0.5%/0-300RPM | +/-0.5%/0-200RPM | +/-0.5%/0-150RPM | +/-0.5%/0-120RPM | |||
Placement angle/ throughput pressure | 20°/0.5MPA | 20°/0.4MPA | |||||
Maximum suction height | 4m(the product data is measure with water as the medium) | ||||||
Weight | 3.5kg | 3.8kg | 7.4kg | 7.9kg |
Type | INV-05 | INV-07 | INV-10 | INV-13 | |||
Plunger | ZrO2, Al2O3 | Al2O3, Sic | |||||
Cylinder | Al2O3, Sic | ||||||
Pump Head | PTFE or SUS316 | SUS316 | |||||
Pump Head Seal Seat | PTFE or SUS316 | PTFE | |||||
Pump Head Seal | Dingqing rubber, slica gel, fluorine rubber | ||||||
Liquid Nozzle and Cleaning Nozzle | PEEK,PTFE,PP,SUS316 | PEEK,PTFE,PP,SUS316 | |||||
Liquid Nozzle Sea | Dingqing rubber, slica gel, fluorine rubber | ||||||
Lip Seal | Lip Seal |