PSK-DELTA system is well suited for both simple and composite structures. So, the use of PSK-DELTA shuttering is always cost-effective. This is realized through the structural features of a panel frame, lock and components. The panel design makes it possible to conduct in concrete works without limiting the speed of concrete casting up to the height of 3 meters. The robot-aided fabrication workshop ensures perfect geometry of shuttering panels.
• Wall formwork
• Column formwork Column formwork
• Universal formwork
• Radial wall formwork
• Foundation formwork
Steel closed section 120x60 mm with polymer powder coating and robust section-shaped cross bars provide high torsion strength and a bearing capacity of the shuttering of up to 90 kN/m2. This formwork is produced according to GOST R52085-200 and complies with grade 1, which is approved by a certificate of conformity.
The system uses a universal lock (EUstadard) providing the single connecting part and ensuring coherence, evenness and tightness of connection.
An opening for a tension bar has a conical shape, which enables moving the tension bar at an angle of 4° whatsoever right and left and facilitates cleaning from concrete; a taper sleeve is made of steel. The tension bar diameter may be up to 20 mm.
The frame features openings for handling.
On the frame, an 18 mm birch plywood is installed featuring enhanced water resistance and a density of the laminating layer of 220 g/m2, which ensures long life and high quality of the concrete surface.
Delta formwork is produced using state-of-art robot-aided equipment.
The frame is coated with powder coating in coater rooms at a temperature of 300°C, which increases the formwork life and facilitates cleaning from concrete.
1. 3-mm thick 120x60 mm steel closed section with polymer powder coating and robust sectionshaped cross bars ensure high torsion strength of PSK-DELTA shuttering and its bearing capacity of up to 90 kN/m2.
2. Easy and quick connection of shuttering panels. Thanks to a special section mounted around the perimeter of the shuttering panel, you can place a universal lock at any point making it possible to create vertical shifts of the shuttering panels.
3. Easy mounting of drawbolts owing to large taper sleeves. You can use drawbolts of up to 20.0 mm in diameter.
4. Openings for transportation enable fast handling.
5. Birch plywood of an increased water resistance and thickness of 18 mm coated with laminate of the 220 g/m2 density ensures long life and high quality of the concrete surface.
6. Mounting handle (optional)