Steel Pin Gauge Measuring Tool strain gages ceramic pin gage

We have steel pin gauge and ceramic pin gauge and we can customized according to your request

Details:

A. pin gauge type:
1, the metric needle gauge: specification range is 0.10 mm to 100.00 mm;Interval is 0.01 mm, 0.02 mm and 0.025 mm, 0.05 mm and 0.10 mm, 0.50 mm and 1.00 mm, etc.;Accuracy: + / - 0.001 mm, + / - 0.002 mm, + / - 0.0005 mm, etc.
2, the imperial needle gauge: specification range in 0.011 ~ 0.011 in;Specifications spacing: 0.001, 0.0005, etc., in in accuracy: + / - 0.001 mm, plus or minus 0.002 mm + 0.0025 mm, 0.0025 mm + 0.005 mm, 0.005 mm, etc.
3, can be customized various non-standard needle gauge.(e.g., 4.356, 12.368,....)

B. Packing:

in bulk, plastic box, so suit, tin box sets, single intubation, suit intubation, with handle needle gauge, needle gauge, check gauge joystick, etc. Can be combined freely according to the requirements of, and can design according to the requirements of the packing.

C. technical parameters:

roughness: Ra0.25, heat treatment HRC60 ~ 63;Diameter precision: + + 0.001 mm, 0.002 mm or roundness: 1.27 um, material: GCr15, 9 sicr, tungsten steel and other materials.

D. exterior form:

smooth needle gauge, with handle needle gauge, promote the rules, ceramic needle gauge, tungsten steel needle gauge, etc

E. the main production equipment:

imported Italian high-precision grinding machine, the Japanese sanfeng laser machines, laser marking machine, vacuum high temperature furnace, mesh belt furnace, cooling tank, etc. Various kinds of advanced processing, testing equipment.In strict accordance with ISO9001:2000 quality management system, effective for all product testing to ensure the product quality.

F: needle gauge, purpose and scope:

mainly used for measuring the size of the hole, the distance of hole, hole depth, can do the check gauge to use is essential tools such as the standardization of hole detection, and be used in the electronic board, circuit boards, molds, precision machinery manufacturing and other advanced technology.

Directions for use and maintenance:

The use of reasonable:
1, inspection gauge measuring surface before using, there can be no rust.PI feng, scratches, spots, etc.;Plug gauge mark should be correct.
2, the role of the plug gauge must be in the cycle test period, and comes with a calibration certificate or tag, or other evidence of plug gauge is qualified file.
3, plug gauge measurement standard conditions: temperature is 20 ° C, load is zero.In the practical use is hard to achieve this requirement.In order to reduce the measurement error, try to use the plug gauge with measured one is measured under isothermal condition, the use of force to small, are not allowed to push the plug gauge force into the hole or to push while rotating.
4, measure, plug gauge should be along the axis of the orifice insert or pull out, cannot tilt;Plug gauge into hole, forbid to move or shake plug gauge.
5, are not allowed to use plug gauge to detect clean artifacts.
Maintenance:
1, plug gauge is one of the precision measuring tool, when used to should take put down gently, not knock against his face.
2, plug gauge after each use, shall be immediately with clean soft cloth or fine cotton plug gauge surface to wipe clean, coated with a thin layer of anti-rust oil, put in special box, dry place
3, plug gauge to execute cycle test, calibration cycle be determined by measuring department.

FAQ

1.Contact information

Contact person: candy

Skype: xuting-candy

Wahtsapp: +86 18826506021

2.Place the order

Products confirmation→Price agreement→Receipt of payment→Goods preparation and

shipping→Goods received→Feedback.

3.Payment terms

We can accept paypal, T/T bank transfer and western union.

4.For some products, custom-made service is available, more details pls contact the

contact person.

5.Usually the goods will be sent out in 3-5 working days after the receipt of payment.