Standing AUS32 dispensing pump
Features
It is based on requirements proposed by automotive giants, like GM, MAN, VOLVO, etc.
Imported components strictly in accordance with requirements of AUS32/DEF units
With the measurement, automatic overflow. Automotive Group for large-scale customers, and urban public transport filling stations.
Configuration
Self-priming pump (316 stainless steel), filling gun (316L stainless steel), PTEF electromagnetic flowmeters, smart digital metering module, PVC connection pipeline.
Specifications
Horizontal multi-stage centrifugal pump: LOWARA 4HMS7 / A
Rated Flow: 40L-120L/min
Accuracy: ± 0.3%
Work Environment: Relative Humidity: 20% ~ 95%
Maximum temperature: 110 °C
Minimum Temperature: -10 °C
Noise at Work (pump): max 73dB
Power Supply: Single phase 220V 50Hz 2850rpm
Power :0.3-0 .9 kw
Maximum pressure: 3.5bar
Filling gun
Diameter: 19mm
Maximum flow rate: 60L/min
Material: 316L stainless steel
Connecting pipeline
Use of rigid PVC pipe, flexible PVC hose used to connect.
2-4m hose length
Diameter: 19mm
Electromagnetic Flowmeter
Ambient temperature: -25 °C ~ +85 °C
Relative humidity: 5% ~ 95%
Mechanical Vibration: Frequency 55 Hz max; amplitude 0.55mm max
Measuring range: 0.09 ~ 40750 m3/h
Fluid Conductivity: measured fluid conductivity 5μs/cm min
Material: polytetrafluoroethylene (PTFE)
Repeatability: 0.1%
Power: 8W max
Intelligent Digital Display Measurement Module
Accuracy: ± 0.5% FS +1 digit
Adjustment control precision:-position: ± 0.5% FS
Power Supply: 220V
Working environment requirements: Temperature: 0°C ~ +50°C
Relative humidity:"85% non-corrosive gas.