IKING shear connector ferrule type connector are made of a material suitable to be welded by arc melting. The dimensions and design of the connector ferrule type connector are in accordance with the BS - EN ISO13918:2008.
Mechanical Properties of Shear Stud Connector | ||||||
Standard | Tensile strength | Yield strength | Elongation | |||
BS EN ISO 13918 SD1 | ≥450MPa | ≥350MPa | ≥15% | |||
AWS D1.1 | ≥450MPa | ≥350MPa | ≥15% | |||
BS 5400 | ≥495MPa | ≥385MPa | ≥18% | |||
AS/NZS 1554.2 | ≥410MPa | ≥345MPa | ≥12% | |||
JIS B1198 | ≥400MPa | ≥235MPa | ≥20% | |||
GB/T 10433 | ≥420MPa | ≥340MPa | ≥14% |
Chemical Component of Raw Material (%) | ||||||||||||
Material | C | Si | Mn | P | S | Al | ||||||
SWRCH15A | 0.13-0.18 | ≤0.10 | 0.30-0.60 | ≤0.035 | ≤0.035 | ≥0.020 | ||||||
SWRCH18A | 0.15-0.20 | ≤0.10 | 0.60-0.90 | ≤0.030 | ≤0.035 | ≥0.020 | ||||||
Q345D | ≤0.18 | ≤0.50 | ≤1.70 | ≤0.030 | ≤0.025 | ≥0.015 |
Shear Stud Connector Type SD (ISO13918:2008) Dimensions (mm) | ||||||||||||
d1-0.4 | 10 | 13 | 16 | 19 | 22 | 25 | ||||||
d5±0.3 | 19 | 25 | 32 | 32 | 35 | 41 | ||||||
d3±0.3 | 13 | 17 | 21 | 23 | 29 | 31 | ||||||
h3±0.5 | 7 | 8 | 8 | 10 | 10 | 12 | ||||||
h4 | 2.5 | 3 | 4.5 | 6 | 6 | 7 | ||||||
l1±1.5 | 40~105 | 40~160 | 40~200 | 40~250 | 60~250 | 60~250 | ||||||
Burn off | 3 | 3 | 4 | 5 | 5 | 6 | ||||||
Ferrule | UF10 | UF13 | UF16 | UF19 | UF22 | UF25 |
Shear Stud Connector Type SC (AWS D1.1) Dimensions (inch) | ||||||||
1/2-0.01 | 5/8-0.01 | 3/4-0.015 | 7/8-0.015 | |||||
d5±1/64 | 1 | 1-1/4 | 1-1/4 | 1-3/8 | ||||
h3 | 9/32 | 9/32 | 3/8 | 3.8 | ||||
l1±1/16 | 2-5.9 | 2-7.874 | 2-9.84 | 3.15-9.84 | ||||
Burn off | 0.125 | 0.187 | 0.187 | 0.187 | ||||
Ferrule | UF13 | UF16 | UF19 | UF22 |
IKING shear connector studs are made of a material suitable to be welded by arc melting.The dimensions and design of the connector are in accordance with the BS - EN ISO13918:2008. Widely used by bridge, steel deck, steel construction etc.
1. There're 8 production line for shear connector studs in our workshop.
2. Rapid reaction and delivery arrangement for your order.
3. OEM service is available for our VIP clients.
4. All standards can be satisfied based on specific request.
We believe superior products and services are the key that we won great reputation and long-term cooperation from our customers during the past years, each piece of IKING shear stud must be passed strictly IKING quality control system before delivery to our customers.
IKING provides appropriate package for shear stud connector , cartons (lined with plastic bags) & plywood pallets is our standard package; barrels (lined with plastic bags) & plywood pallets based on customer's specific requirements.
Cartons Packages
1. About 25kgs/cartons, 48cartons/pallets.
2. Generally speaking, 1 x 20' GP container can load about 16-20 pallets.
1. About 200kgs/barrels, 6 barrels/pallets Packages.
2. Generally speaking, 1 x 20' GP container load 16-20 pallets.
A: 1. All of our materials are qualified mild carbon steel (SWRCH18A) from Xingtai Steel Factory.
2. The phosphating pretreatment starts from the raw material with drawing machine.
3. To ensure better mechanical property and conform to BS EN 13918:2008, AWS D1.1 etc., the biggest factory in Zhejiang, China
provides us the multi-station cold forging machine.
4. Aluminum balls at the bottom are installed by the automatic riveting machine.
5. IKING's studs will be good as new after a long time of shipping on the sea with rust prevention.
6. With our well-managed production arrangement, the delivery time is much shorter than our rivals.