Standard ISO 6195 Type A1 GHP DH04 Single-acting Dust Wiper Seal
The type can replace as : PWF - ASW - ASOB - A1 - PU - P5 - 834 - A47 - A41 - AE41 - AE47 - SAG - WWS - K09 - MSRW - WP8 - MSWS - WS-11 - A01 - U-A101 - U-A104 - DH-04
Standard ISO 6195 Type A1 GHP DH04 Single-acting Dust Wiper Seal
Code | d | D | h | t |
1 | 12 | 20 | 7 | 4 |
2 | 14 | 22 | 7 | 4 |
3 | 16 | 24 | 7 | 4 |
4 | 18 | 26 | 7 | 4 |
5 | 20 | 28 | 7 | 4 |
6 | 22 | 30 | 7 | 4 |
7 | 25 | 33 | 7 | 4 |
8 | 28 | 36 | 7 | 4 |
9 | 30 | 38 | 7 | 4 |
10 | 32 | 40 | 7 | 4 |
11 | 35 | 43 | 7 | 4 |
12 | 36 | 44 | 7 | 4 |
13 | 38 | 46 | 7 | 4 |
14 | 40 | 48 | 7 | 4 |
15 | 42 | 50 | 7 | 4 |
16 | 45 | 53 | 7 | 4 |
17 | 48 | 56 | 7 | 4 |
18 | 50 | 58 | 7 | 4 |
19 | 50 | 62 | 10 | 5.5 |
20 | 55 | 63 | 7 |
4 |
21 | 56 | 64 | 7 | 4 |
22 | 60 | 68 | 7 | 4 |
23 | 62 | 70 | 7 | 4 |
24 | 63 | 71 | 7 | 4 |
25 | 65 | 73 | 7 | 4 |
26 | 70 | 78 | 7 | 4 |
27 | 70 | 82 | 10 | 5.5 |
28 | 75 | 83 | 7 | 4 |
29 | 78 | 86 | 7 | 4 |
30 | 80 | 88 | 7 | 4 |
31 | 80 | 92 | 10 | 5.5 |
32 | 85 | 93 | 7 | 4 |
33 | 90 | 98 | 7 | 4 |
34 | 95 | 103 | 7 | 4 |
35 | 97 | 105 | 7 | 4 |
36 | 100 | 108 | 7 | 4 |
37 | 105 | 117 | 10 | 5.5 |
38 | 110 | 122 | 10 | 5.5 |
39 | 120 | 132 | 10 | 5.5 |
40 | 125 | 137 | 10 | 5.5 |
41 | 128 | 140 | 10 | 5.5 |
42 | 130 | 142 | 10 | 5.5 |
43 | 140 | 152 | 10 | 5.5 |
44 | 145 | 157 | 10 | 5.5 |
45 | 150 | 162 | 10 | 5.5 |
46 | 160 | 172 | 10 | 5.5 |
47 | 170 | 182 | 10 | 5.5 |
48 | 180 | 192 | 10 | 5.5 |
49 | 190 | 202 | 10 | 5.5 |
50 | 200 | 212 | 10 | 5.5 |
51 | 220 | 235 | 13 | 6.5 |
52 | 230 | 245 | 13 | 6.5 |
53 | 240 | 255 | 13 | 6.5 |
54 | 260 | 275 | 13 | 6.5 |
55 | 275 | 290 | 13 | 6.5 |
56 | 325 | 340 | 13 | 6.5 |
Standard ISO 6195 Type A1 GHP DH04 Single-acting Dust Wiper Seal
Standard ISO 6195 Type A1 GHP DH04 Single-acting Dust Wiper Seal
A1/GHP Wiper Seal is to prevent dust, dirt, sand or fines from entering. This can be achieved with a special design that greatly protects the guide parts and extends the life of the seals. In addition, A1/GHP wiper seal installation does not require ring screws or brackets. No strict tolerances and metal inserts in the requirement. Wiper ring is a continuous loop and is extremely easy to fit into the groove. So, the back of the dust ring should be protected from pressure. Wiper seals GHP mounting in closed housing single acting seal. It can replace with Wiper seals PWF, ASW, P5, ASOB, A1, 834, A47, A41, SAG, WWS, K09 etc. GHP wiper or dust seal represent an essential component for all hydraulic and pneumatic equipment. The main feature of GHP is to provide complete protection against impurities such as dust, fluids or other types of contamination which could eventually reach the sealing system through the rod and cause damage to all internal components of the cylinder. This type of wiper seal is suitable for applications particularly exposed to dusty and humid enviornments and it is also very easy to fit or assemble. In case of service conditions particularly aggressive we advise you to kindly contact us for a proper recommendation about a sealing solution. |
Standard ISO 6195 Type A1 GHP DH04 Single-acting Dust Wiper Seal
Standard ISO 6195 Type A1 GHP DH04 Single-acting Dust Wiper Seal
Standard ISO 6195 Type A1 GHP DH04 Single-acting Dust Wiper Seal
Standard ISO 6195 Type A1 GHP DH04 Single-acting Dust Wiper Seal
Standard ISO 6195 Type A1 GHP DH04 Single-acting Dust Wiper Seal
Standard ISO 6195 Type A1 GHP DH04 Single-acting Dust Wiper Seal
Standard ISO 6195 Type A1 GHP DH04 Single-acting Dust Wiper Seal
High Abrasion GHP A1 PU Hydraulic Cylinder Liner Seal Ring / Wiper Seal A1 PU Hydraulic Dust Wiper Sealing Oil Seals PU/TPU A1 AD CK Y3 LBH wiper seal/dust seal High quality PU NBR A1 wiper seal DH07 A1 PU Hydraulic Dust Wiper Sealing Standard Sizes DH04 Lip Wiper Seal for Rod Dust Seal DH04 Type Hydraulic DH04 PU Double Wiper Seal DH04 PU Rubber Dust Seal DH04 Wiper Seal DH04 Dustproof Seal Dust Proof PU Polyurethane Wiper Scraper Seal A1/GHP Wiper Seal, A1 type Dust proof seal, hydraulic dust seal wiper Seal GHP
The A1 wiper ring serves to prevent ingress of dust, dirt, sand and swarf.
This is achieved by its special design which largely prevents scoring, protects the guiding parts and extends the service life of the seals. An oversized outer diameter ensures interference fit in the groove, thus preventing ingress of foreign particles and moisture via the static seal fit of the wiper. The A1 wiper is available in both Ultrathan® and rubber compounds. The Ultrathan® versions are characterized by extremely high wear resistance. • Good wear resistance. • High temperature resistance in case of suitable compound selection. • Excellent media resistance in case of suitable compound selection. • Suitable compounds available for special requirements of the chemical process industry. • Suitable compounds available for special requirements of the food processing industry. • Dimensions according to DIN ISO 6195, Type E. • Product geometry prevents dirt deposits at the front face of the cylinder. • Installation in closed and undercut housings. Range of application: Axially operated rods in hydraulic and pneumatic working cylinders, plungers and rod guidances. The A1 wiper is available in the following compounds: N3587 - Industrial applications P5008 - Heavy-duty V3664 - High temperatures P5009 - Low temperatures P5001 - Bio-degradable fluids P5000 - FDA-approved W5001 - Harsh environment