Wire mesh demister, also known as wire mesh mist eliminator, it is a kind of high efficiency vapor liquid separation device, it is used to remove the steam or vapor in the processing equipment.
Wire mesh demister is most often used to separate liquid drop with diameter of more than 3-5 μm in the separation tower. It is widely used in the chemical, petroleum, medical, light, metallurgy and environmental protection industries.
How a wire mesh demister works:
Step one: a vapor stream carrying entrained liquid droplets pass through a pad. The vapor moves freely through the knitted mesh.
Step two: the inertia of the droplets causes them to contact the wire surfaces and coalesce.
Step three: the large, coalesced droplets formed in the mesh ultimately drain and drop to the vessel bottom.
Product Materials
Stainless steel wire, nickel wire, copper wire, galvanized wire, iron wire, monel wire, plastic and other alloy materials are at customers choice.
We can provide reliable solutions to customers, we can also provide the Wire mesh demister according to customers' detailed requirements.
1. Structure simple, weight light.
2. High factor of porosity, low head loss.
3. Great contact surface area, high removing foam ratio.
4. Convenience of installing, operating and repairing.
5. Long service life.
Type |
Bulk density (Kg/m3) |
Specific surface area (m2/m3) |
Void ratio (%) |
|||
SP |
168 |
529.6 |
97.88 |
|||
DP |
186 |
625.5 |
97.65 |
|||
HP |
128 |
403.5 |
98.39 |
|||
HR |
134 |
291.6 |
98.32 |
|||
Standard Type Wire Mesh Demister |
||||||
Wire size (mm) |
Net width tolerance (mm) |
Bulk density (Kg/m3) |
Specific surface area (m2/m3) |
Void ratio (%) |
||
Flat wire |
Round wire diameter |
+10 -0 |
150 |
475 |
320 |
98.1 |
0.1×0.4 |
0.23 |
|||||
Remarks: Each 100mm thick mat is a 28 layer wire mesh. |
||||||
Efficient Type Wire Mesh Demister |
||||||
Wire size (mm) |
Net width tolerance (mm) |
Bulk density (Kg/m3) |
Specific surface area (m2/m3) |
Void ratio (%) |
||
Flat wire |
Round wire diameter |
+10 -0 |
182 |
626 |
484 |
97.7 |
0.1×0.3 |
0.19 |
|||||
Remarks: Each 100mm thick mat is a 32 layer wire mesh. |
||||||
High Penetration Type Wire Mesh Demister |
||||||
Wire size (mm) |
Net width tolerance (mm) |
Bulk density (Kg/m3) |
Specific surface area (m2/m3) |
Void ratio (%) |
||
Flat wire |
Round wire diameter |
+10 -0 |
98 |
313 |
217 |
98.75 |
0.1×0.4 |
0.23 |
|||||
Remarks: Each 100mm thick mat is a 28 layer wire mesh. |
Type |
Size |
Standard type |
40-100, 60-150, 105-300, 140-400, 160-400, 210-570, 252-800, 30-1050 |
High-efficiency type |
60-100, 80-100, 80-150, 90-150, 800-400 |
High-penetration type |
150-300, 200-400, 00-600, 800-400 |
Damping type |
20-100, 30-150, 70-400, 170-560, 170-600 |