Description of Portable Stainless Steel Square Water Storage Tanks:
Stainless steel water tank is a new type water tank after the development of reinforced concrete water tank , steel plate water tank, stainless steel water tank
1.Range Applications
(1) Life and fire fighting water supply system
(2) Architectural water storage tank, adjust the water tank, fire water tank, the expansion of the procurement system and condensed to water tank
(3) Boiler system of the supplementary water tank, heat preservation water tank
(4) It can be used in water purification, water treatment
2.Features and structure
(1) Strong resistance to corrosion.
We can customize according to the client's demands:
Material |
Size |
Panel Shape |
Thickness |
Remarks |
Stainless Steel 304
|
1x1m, 1x0.5m, 0.5m x 0.5m |
Ball shape |
1-5mm |
Thickness Tolerance: ±0.2mm |
Hot-dipped Galvanized Steel |
4ftx4ft, 1x1m, 1x0.5m, 0.5x0.5m |
“ X “ shape Ball shape |
1-5mm |
|
GRP/FRP/SMC
|
1x1m, 1x0.5m, 0.5x0.5m |
Ball shape |
4-24mm |
1. Support for Panels: Longtime FRP Co. supply The panels whichare supported externally or internally by an adequate support system. External Reinforcement - Hot Dipped Galvanized Steel Internal Reinforcement - Hot Dipped Galvanized or Stainless Steel 304 rod support and tie-rod
2. Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long experience and technology on SMC products. It maintains soft itself and adhesives even at low temperatures
3. Bolts, nuts and washers for the assembly of panels: Exposed externally are hot dipped galvanized steel and in contact with water internally are hot dipped galvanized steel or stainless steel 304
4. Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel or stainless steel 304
5. Ladders: SMC sectional tank of 1.5m depth or more shall be provided with internal ladder made up of materials same with the supports. The external ladders shall be galvanized mild steel or equivalent
6. Drainage: The dome shaped bottom panel with a concave drain panel facilitates complete and fast drainage.The concave drain panel has been designed to ensure the periodic cleaning and inspection of tank
7. Overflow Screens: it can be supplied with a screen overflow having a micro mesh filter
8. Man-hole opening & Inspection Hatches: the size can be customized; normally it is supplied with a standard size of:600 x 600mm. the opening can be designs of bolt, seal-tight locking arrangement
9. ABS roof vent with PE insect screen
10. Float level indicator, optional SS304 for internal and external support structure are available on request
Water tank size: Can be made as your reuqest.
Panel size: 0.5m*1m
Wall board thickness: 5mm,8mm,10mm,12mm,14mm,16mm etc.
4.Physical Properties
DESIGN PARAMETERS FOR SECTIONAL TANK |
||
Tensile Strength |
≥70MPa |
|
Flexural Strength |
≥100MPa |
|
bending modulus |
≥7.0GPa |
|
Barcol Hardness |
≥60MPa |
|
Water Absorption |
≤1.0% |
|
Fiberglass content |
≥25 25% |
|
Light transmission |
|
|
Outdoor weathering(Natural sunlight) |
Stabilized |
|
Toxicity |
|
|
Micro biological growth |
|
We usually use wooden pallet or container.we can make the packing according to customer's request.
We will delivery products 20 days.
Picture of water tanks for sale
Our factory workshop
If you are interested in our stainless steel water tank, please don't hesitate contact with us!