Square Type Photoelectric Sensor Switch Relays Output 20m Through Beam Models Built-in Amplifier Optical Sensor with wire
Sensing method | Appearance | Connection method | Sensing distance | Output state | Output | Model Number |
Through beam | Pre-wired(2m) | 20m |
Light ON
Dark ON |
relay |
AG2H-T20X1
AG2H-T20X2 |
|
Retro-reflective (with MRS function) | 2.5m |
Light ON
Dark ON |
relay |
AG2H-R2X1
AG2H-R2X2 |
||
Retro-reflective (without MRS function) | 4m |
Light ON
Dark ON |
relay |
AG2H-R4X1
AG2H-R4X2 |
||
diffuse reflective | 1000mm |
Light ON
Dark ON |
relay |
AG2H-D1X1
AG2H-D1X2 |
Through Beam | Retro-Reflective(with MRS function) | Retro-Reflective(without MRS function) | Diffuse reflective | |||||
Model | AG2H-T20X1 | AG2H-T20X2 | AG2H-R2X1 | AG2H-R2X2 | AG2H-R4X1 | AG2H-R4X2 | AG2H-D1X1 | AG2H-D1X2 |
Sensing distance | 20m | 2.5m | 4m |
1000mm (white paper 100mm×100mm) |
||||
Standard sensing object | Opaque: ∅14.8mm Min |
Opaque: ∅75mm Min |
----- | |||||
Differential travel |
20% of sensing distance( max ) | |||||||
Directional angle |
both emitter and receiver: 3-20° | both emiter and receiver: 1-5° | -------- | |||||
Light source(wavelength) |
Infrared LED (950 nm) |
red LED (660nm) | Infrared LED (950 nm) | |||||
Power supply voltage |
DC24~240v ±10%, ripple (p-p): 10% max, AC24~240V±10% 50/60Hz |
|||||||
Current consumption AC |
3W max | 2W max | ||||||
Current consumption DC | 3W max | 2W max | ||||||
Control output |
relay output: AC250V3A(cos =1)max, DC5V10mA min | relay output: AC250V3A(cos =1)max, DC5V10mA min | relay output: AC250V3A(cos =1)max, DC5V10mA min | relay output: AC250V3A(cos =1)max, DC5V10mA min | ||||
Life (relay Output)
Mechanical life |
50 million times min (frequency of opening and closing: 18,000 times per hour) | |||||||
Life (relay Output) Electrical life |
100000 times min (frequency of opening and closing: 1800 times per hour) | |||||||
Response time | 30ms max | 30ms max | 30ms max | 30ms max | ||||
Sensitivity adjustment | ----- | ----- | ----- | ----- | ----- | ----- | One-turn adjuster | |
Ambient illumination |
Receiver side: Incandescent lamp: 3,000 lx max Sunlight: 10,000 lx max | |||||||
Ambient temperature range |
Operating: -25 to 55°C, Storage: -30 to 70°C (with no icing or condensation) | |||||||
Ambient humidity range |
Operating: 45% to 85%RH, Storage: 35% to 95% (with no condensation) | |||||||
Insulation resistance | 20 MW min. at 500 VDC | |||||||
Dielectric strength | AC1,500V 50/60Hz 1min | |||||||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions | |||||||
Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | |||||||
Degree of protection |
IEC IP64 | |||||||
Connection method | Pre-wired cable (standard length: 2 m) | |||||||
Weight |
Approx. 420g |
Approx. 250g | ||||||
Material | ABS(case), Acrylate resin(lens), metal (accessories) | |||||||
Accesories | Metal mounting accessories (with screws), nuts, reflectors (only regression reflector type) |
Related model
Micro photoelectric sensors
AKE3-Y AKE3-T AKE3-F AKE3-R AKE3-K AKE3-L
OUR COMPANY
CERTIFICATION