Brand: Simens ( optional)
Original: Germany
Our standard motor for main power is not Simens, we usually use Chinese Good brand, it is good enough for long time use.
But if you need Simens, We can replace it with its factory cost from your side.
I. Advantage of Products:
1. The latest design can resolve the problems like getting struck, too many repairs form roll-shearing displacements lock machine.
2. The three-line bending function can crimp narrow edges and stably process 0.5-1.2mm galvanized sheet to avoid wasting.
· Mechanical arm clutching, locating and transferring platform
· Displacement lock machine
· Line 3 host+ Single rack
II. Function:
It's mainly for uncoiling, leveling, beading, punching, locking. Because of its small space requirement and easy to install and operate the machine can upgrade to "super line 4".
III. Performance Features:
All the rolling reels are made of bearing steel so that the lifetime prolongs by more than 5 times.
· Under the material-saving mode of CNC system, machine can withdraw material automatically after finishing tasks.
· With production memory functions, the production orders can be tracked and checked.
IV. Main Import Configuration:
· MITSUBISHI HMI Display And PLC
· MITSUBISHI Frequency Converter
· Japan NEMICON Inverter
· Taiwan Hydromax Pump
· Taiwan High Temperature Resistant Tubing
V. Basic Configuration:
· One electric coil cradles, 2 material trays (5-7t each roll)
· One rack
· One host (line3 host)
· One mechanical arm clutching, locating and transferring platform
· One displacement type locking machine
· One set of computer controlling system
MODEL | Coil Width | Thickness | Speed | decoiler capacity | Dimensions | Power | Weight |
BFL-III-1.2x1300 | 1250 mm | 0.4-1.2 mm | 15 m/min | 7 tons | 4000x1950x1700 mm | 7 KW | 3.8 ton |
BFL-III-1.2x1600 | 1524 mm | 0.4-1.2 mm | 15 m/min | 7 tons | 4000x2200x1700 mm | 8.5 KW | 4.2 ton |
If you use TDC or Angle flange connection to fabricate duct, then you can choose this function:
Automatically folding to square or L shape duct with grooves and notches according to the sizes you required.
If you make duct by TDF connection, then you can choose this function:
Automatic notching and beading, then use Pittsburgh lockformer, TDF flange machine and TDF bender to make square or L shaped.
Brand: Simens ( optional)
Original: Germany
Our standard motor for main power is not Simens, we usually use Chinese Good brand, it is good enough for long time use.
But if you need Simens, We can replace it with its factory cost from your side.
Brand: Schneider
Original: Germany
Usually, we will recommend you to use this brand of electrics, but with this machine, we think Chinese CHT Brand is definetely good enough to you.
Brand: Mitsubishi
Original: Japan
Our standard of all duct line machines all use Japan-Mitsbishi, including PLC, Driver and Inverter.
In our Duct line III, we use double inverter to increase its working accuracy.
Brand: Mitsbishi
Original: Japan
We use Mitsbishi screen with total set of Mitsbishi PLC, driver and inverter etc.
we have our own programmer to upgrade our system.
91.8% Response Rate
91.8% Response Rate
91.8% Response Rate