JBY800 high pressure grouting machine
JBY800 high pressure grouting machine is the professional machine for structure reinforcement, leak stoppage, inject polyurethane and epoxy resin materials with quick disassembly, easy to maintain and super high pressure. The parts of machine are not deformed when being injected. Besides, its small volume can avoid the inconvenience of heavy machinery for workers. Therefore it is the best choice for the persons who work on the professional water-sealing project.
Specification
JBY 800 grouting machine |
|
Weight |
8kg |
Maximum output pressure |
13500PSI |
Pressure of starting again |
less than 7500PSI |
Safe range of high-pressure hose |
less than 13500PSI |
Safe range of switch valve |
less than 10000PSI |
Safe range of grease coupler |
less than 16000PSI |
Applicable materials |
Polyurethane grout, epoxy resin |
Packing size |
31*19*50cm |
Advantage
1.it can be repaired in the construction site, avoiding stopping working because of sending for maintenance due to mechanical failure.
2.Portability: small size, light weight, easy to carry, simple operation
3.High efficiency ,Safety,Continuous pressure,Durability
4.Multi-function: one machine with multiple functions
Suitable Materials
Application Places
Leakage blocking, reinforcing and strengthening for underground, floor, second construction joints, subway, tunnel, dam, structure hives, concrete crack etc.
Accessories
Drill |
1 SET 550W |
High Pressure hose |
1 PC 5M |
Shut-off Value |
1 SET |
Repairing Kit |
1 SET |
Seal Set |
1 SET |
T Type Wrench |
1 SET |
Rubber Pad |
10 PCS |
Grease Coupler |
1 PC |
Filter |
1 PC |
Material Cup |
1 SET |
Machine Packers
The machine have included all of accessories except packers which is disposable.The choice of packers size is depended on the depth of crack.
Direction for Use
1. Before starting, please confirm whether the switch of electric drill is in R (forward) position or not.
2. When first time used the new machine, you should pour the lubricating oil into material cup and open the power then rotate the material cup over again.
3. After completing construction, you must use the cleaning agent clean the machine immediately.
Matters needing attention
Perfusion when wear protective supplies (such as gloves, masks, goggles) to avoid direct contact with the skin, such as contamination of slurry please rinse with water, When the eyes are touched the product, first rinse with plenty of water then immediately go to the hospital.