1.simple structure
2.long-time usage
3.high efficient heater exchange
4.it could easy to bent into many kinds of shape
5.good insulation could withstand high voltage
1.simple structure
2.long-time usage
3.high efficient heater exchange
4.it could easy to bent into many kinds of shape
5.good insulation could withstand high voltage
Cross Section | 1.5mm , 1.8mm, 1.3x2.3mm | ||||
Sheath material | Chrome Nickel Steel | ||||
Insulation material | High purity MgO | ||||
Heating element | NiCr 8020 | ||||
Voltage Range | Maximum 250 volts, standard 230 volts | ||||
Power rating | Depending on application | ||||
Insulation Resistance | 10 MW @ 500V DC (special on request) | ||||
Power tolerance | ± 10% (Tighter Tolerance available) | ||||
Current Leakage | : < 0.5 mA @ 253 V AC | ||||
Unheated Length | Minimum 25 mm plus adapter connection | ||||
Minimum Bending diameter | 6mm |
Sensing point is 5mm away from the tip of the heater and is not in contact with the sheath.
Any of the three available options can be
incorporated (Refer Pg 4 for figures):
1) Silicon Coated Fibreglass Sleeve
2) Wire Braid
3) Stainless Steel Flexible Conduit
Black Colour PFTE Leads - Power Supply
White Colour PFTE Leads - (+) positive1.Hot Runner Nozzles &Bushings
2.Tube Extrusion
3.Pipe Forming
Poland clients
American clients
Pakistan clients
Pls click below "Send" to get the best price.