design permits a faster and smoother cutting action and the end mills are sized to provide a good cutting range while affording adequate rigidity.
UKO manufactures and supplies literally hundreds of both standard and custom size end mills for most applications. Whether you need a standard or non-standard end mills with flat, ball nose or corner radius forms, or even micro end mills forms, UKO can turn your design into an end mill in just days. It doesn't matter if it's steel machining or stainless steel machining or cast iron machining, regardless of its use, our end mills are exceptionally made from quality ground ultrafine carbide.
Model No. | Flute Diameter | Flute Length | Overall Length | Shank Diameter |
D | L1 | L | d | |
X5E0104 | 1 | 3 | 50 | 4 |
X5E0154 | 1.5 | 4.5 | 50 | 4 |
X5E0204 | 2 | 6 | 50 | 4 |
X5E0254 | 2.5 | 7.5 | 50 | 4 |
X5E0304X | 3 | 8 | 50 | 3 |
X5E0304 | 3 | 8 | 50 | 4 |
X5IE0304 | 3 | 12 | 75 | 4 |
X5E0304B | 3 | 8 | 50 | 6 |
X5IE0304B | 3 | 12 | 75 | 6 |
X5E0404 | 4 | 10 | 50 | 4 |
X5IE0404 | 4 | 16 | 75 | 4 |
X5E0404B | 4 | 10 | 50 | 6 |
X5IE0404BL | 4 | 16 | 75 | 6 |
X5E0504 | 5 | 15 | 50 | 6 |
X5IE0504 | 5 | 15 | 75 | 6 |
X5E0604 | 6 | 16 | 50 | 6 |
X5IE0604 | 6 | 24 | 75 | 6 |
X5JE0604 | 6 | 24 | 100 | 6 |
X5E0804 | 8 | 20 | 60 | 8 |
X5IE0804 | 8 | 24 | 75 | 8 |
X5JE0804 | 8 | 30 | 100 | 8 |
X5E1004 | 10 | 25 | 75 | 10 |
X5JE1004 | 10 | 40 | 100 | 10 |
X5E1204 | 12 | 30 | 75 | 12 |
X5JE1204 | 12 | 45 | 100 | 12 |