Features:
*1. This product is an AC/DC dual-purpose oxygen pump. It adopts pure copper core and high-quality lithium battery. Its cycle life is as long as 500 times. It has the characteristics of small volume, low sound, large air volume and long service life. It can be used continuously for 24 hours when fully charged.
*2. The internal circuit is intelligently controlled by imported single chip microcomputer, featuring constant voltage and constant current charging, overcharge and overdischarge protection, low power alarm and high safety factor.
*3. Widely used for oxygenation of various ornamental fishes, aquariums, fish lovers, corporate aquariums and domestic fish farming, especially for emergency oxygenation during power failure, and oxygenation functions of field fishing and small amount of aquatic transportation.
Usage:
1. Press the power switch (press for 3 seconds) for a long time and the blue light will come on, which will start to oxygenate. This is the long-term oxygenate mode.
2. Press the power switch (press 1) again to switch the oxygen-pumping mode to the intermittent mode (the cycle mode of stopping for 2 seconds and pumping oxygen for 8 seconds).
3. Charging: Please use the charging head of USB2.0 adapter to charge the product. When the voltage is insufficient, the blue light will turn into a red light display and enter a flashing state, which means that the voltage is insufficient. Please charge in time. You can also oxygenate while charging, that is, oxygenate while charging.
Product parameters:
Charging input: DC 5V/1A
Battery capacity: 3.7V/3600mA/h
Air pressure: 0.15mpa
Air volume: 2L/min
Product size: 100*80*38mm
Product weight: 560g
Packing size: 145*155*85mm
Lists:
Hose * 1
Non-return valve * 1
Gassy bubble stone * 1
Charging line * 1
Foot pad * 4
Hanging buckle * 1
Screw * 1
Solar panel * 1
Notes:
1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2.Please allow slight manual measurement deviation for the data.