Technical features | ||||||||||||
Component Model | SGM-FL-150W | SGM-FL-135W | SGM-FL-120W | SGM-FL-110W | SGM-FL-80W | SGM-FL-60W | ||||||
Peak power(WP): | 160W | 135W | 120W | 110W | 80W | 60W | ||||||
Voltage at Pmax(Vmp): | 25.5V | 23.2V | 20.9V | 18.6V | 19.8V | 19.8V | ||||||
Current at Pmax(Imp): | 5.97A | 5.97A | 5.97A | 5.97A | 4.04A | 3.13A | ||||||
Open circuit voltage(Voc): | 30.1V | 27.4V | 24.6V | 21.9V | 23.4V | 23.4V | ||||||
Short circuit current(Isc): | 6.32A | 6.32A | 6.32A | 6.32A | 4.28A | 3.32A | ||||||
Solar cells: | SUNPOWER 3.46W | |||||||||||
Min power tolerance: | ±3% | |||||||||||
Max System Voltage(VDC): | 45V DC | |||||||||||
Module Efficiency: | 22.60% | |||||||||||
Temperature Coefficient of Pmax: | -0.24%/℃ | |||||||||||
Temperature Coefficient of Voc: | -0.25%/℃ | |||||||||||
Temperature Coefficient of ISC: | -0.06%/℃ | |||||||||||
Nominal Operating Cell Temperature: | 45+/-2℃ | |||||||||||
Data under standard testing conditions(STC):1000W/M²; 1.5AM | ||||||||||||
Mechanical Characteristics | ||||||||||||
Type of Connector: | MC4 Connector | |||||||||||
Dimension A x B x C: | 1460*540*3mm | 1330*540*3mm | 1200*540*3mm | 1070*540*3mm | 840*540*3mm | 625*540*3mm | ||||||
Weight: (kg) | 2.86KG | 2.63KG | 2.34KG | 2.18KG | 1.70KG | 1.31KG | ||||||
No.of mounting Holes in Frame: | 6 * φ6mm holes | |||||||||||
Junction Box(protection degree): | PV-HX021 | |||||||||||
Qualification Test Parameters | ||||||||||||
Dielectric Insulation Voltage: | 45V DC | |||||||||||
Operating Temperature: | (-10℃-+60℃) | |||||||||||
Warranty:For 1 year and service life of 5 years. |