| | |
| | |
| | S2(Single phase 220V): Single phase AC, (200-240)V |
| | T4 (Three phase 400V ) : Three phase AC (380-480) V |
| | 50/60Hz ± 5% |
| | Overload(G):150% rated output current 60s and 200% rated output current 2s. |
| | Light load(P):120% rated output current 60s |
| | Constant torque V/f, Quadratic load V/f, No PG vector control, Energy saving mode |
| | Outside terminals (including logic multi-step, analog input, UP/DOWN given), keypad panel, series communication. |
| | Outside terminals ( i.e. Logic input), keypad panel, series communication. |
| | 1. No PG V / f control: 150% rated torque / 3Hz 2. No PG vector control: 150% rated torque /0.5H |
| | Compatible with traditional PLC programming platform / high-level language (C / Python) / other programming platform |
| | 1. 5V:Maximum current 10mA, which is used on bench potentiometer. 2. 24V: Maximum current 100mA, which is used for logic entranc |
| Hardware interface protocol | |
| Software communication protocol | |
| | Ontology:11kW:6ways,LI1~LI4(Both inverter and PLC control can be used) |
| | AI1,AI2Configurable as a logic input port |
| | |
| | Extension: based on expansion board features |
| | Positive logic (Source) or Negative logic (Sink) |
| | |
| | AI1:0-5VDC,or 0-10VDC,or 0/4-20mADC AI2:0-10VDC,or PTC probe input or PT |
| | Can only be used for inverter control (frequency signal setting, feedback signal setting, temperature monitoring, etc.) / PLC switch output |
Panel potentiometer input | | Precision:10bit/inverter control (frequency signal setting)/PLC analog quantity output |
| | 0-10VDC |
| | 0/4-20mADC |
| | Output frequency, output current, speed given, series output data and many other functions/PLC analog quantity output |
| | IP20 |