Smart RFID engine push start stop for car lock

Installation Precautions:

1.When the vehicle has a steering wheel lock, while inserting the key into the keyhole and turning to the ACC gear to unlock the steering wheel lock, unplug the ignition plug of the original car to prevent the car's audio power consumption.

2.When the original car has an anti-theft chip, remove the original car's anti-theft chip and attach it to an area where the original car can scan, otherwise it may lead to startup failure

3.Because the base of the start button is a metal material, when you place it, if it interferes with the anti-theft chip of the original car, choose another area for placement or padding.

4.The output of this product is 5-wire, Red one is for FireWire 12V, Orange one is for ACC wire--Usually below first gear,White one is for power wire ON1--Usually below second gear,Yellow one is for Start ignition wire,Brown one is for power wire ON2(Please pay attention to the judgment when installing. This wire has power when the key is in the ON position, but no power at the moment of starting, and there is power after starting.)

5.When encountering some models with only 4 output wiring, At this time, you only need to use the orange wire (ACC power supply), white wire (ON power supply), yellow wire (ignition start wire, red wire (connect to the fire wire at the original car key head)), the brown wire is not used or connected with the white ON1 wire.

6.When encountering some models with 6 output wirings, in addition to wiring in accordance with the method in item 4 above, at this time, it is necessary to find out the function of the more 6 wires.The method is to use the key to turn to the ACC position, the ON position, and the start position, and detect the power supply of the sixth line under these 3 different states.If the 6th line needs to be powered at startup, it should be connected in parallel with the yellow start line or isolated by a relay.If there is power supply in the ON position, connect the white wire in parallel or isolate the power supply with a relay. Otherwise, it will be difficult to start

7.Compared with the start-up part of the all-in-one (with one-button start and keyless entry function), remember that the ground wire must be connected firmly and the ground wire cannot be extended,Otherwise, it may be difficult to start or the start indicator will be off when you step on the foot brake. These are all due to the loose ground wire.

8.In some models, the foot brake is powered by the ON gear. At this time, the foot brake wire must be cut off and directly connected to the 12V power supply. In this way, it won't happen to start by pressing the switch twice.

More discount of product and freight cost, please contact us

This is a simple and easy use RFID Car Alarm with Finger Engine Start Push Button Start Stop and Transponder Immobilizer. RFID Car Engine Push Starter is easy to install and use, can start or stop your car much easier and keep your car safe at the same time. This item is only work with DC12V cars at the moment. 

Feature:

1.Push button engine start/shut down.
2.Automatically lock the host after stalling 15 seconds.
3.Open acoustics and dashboard function.
4.RFID engine lock.
5.Immobilizer, with warded lock card anti-theft function, the system will enter arming mode after 15 seconds automatically when car is stopped.
6.In arming mode, when the responder gets close to (about 2 - 5cm) the wire circle, the system will sound Bi Bi, which indicates the system is disarm.
7.Can be matched your car alarm system or keyless entry system.
8.Can be used in all kind of 12V cars.
9.Easy to install and to detach.

Features: Durable,Portable
Functions: Improve driving safety
Material: ABS,Electronic Components,Metal
Color: Black

Product weight: 0.3 kg
Package weight: 0.4 kg
Package size (L x W x H): 17.00 x 14.50 x 5.00 cm

Package Contents: 1 x Car Engine Push Starter Host; 1 x Push Start Stop Button;1 x RFID Sensor Ring ; 2 x RFID Key;2 x Wire;1 x English User Manual.