Input voltage range | 80V to 450VDC input, 3PH 110VAC output, 1S model 150V to 450VDC input, 3PH 220VAC output, 2S/2T model 250V to 800/900VDC input, 3PH 380/440/480VAC output, 4T model |
Recommended input voltage (Voc and Vmp) | Voc 180VDC, Vmp 155VDC for 1S model & 110VAC pumps Voc 370VDC, Vmp 310VDC for 2T model & 220VAC pumps Voc 650VDC, Vmp 540VDC for 4T model & 380VAC pumps |
Motor type | Control for permanent magnet servo motor and asynchronous motor pumps. |
Input power | DC power from solar arrays or AC grid power |
Maximum DC power input | 450VDC for 220AC output & 800/900VDC for 380V AC output, (900V needs remark) |
Rated output voltage | Single phase 220V, 3-phase 220V/380V/480V |
Output frequency range | 0~50/60Hz (0-400HZ for PMSM) |
MPPT efficiency | 99.6%, |
Ambient temperature range | G-type inverter with submersible pumps, and P type for general pumps. |
Solar pump control special performance | MPPT ( maximum power point tracking), CVT (constant voltage tracking), auto/manual operation, dry run protection, low stop frequency protection, minimum power input, motor maximum current protection, flow calculating, energy generated calculating. |
Protection function | Phase loss protection, phase short circuit protection , ground to phase circuit protection , input and output short circuit protection. Stall protection |
Protection degree | IP20, Air force cooling |
Running mode | MPPT , CVT, variable frequency mode |
Standard | CCC, CE, IEC |