INJECTION UNIT HJ-950A | ||||||||
SCREW DIAMETER | mm | 30 | 35 | 40 | ||||
SCREW L/D RATIO | L/D | 24.5 | 21 | 18.4 | ||||
Theoretical Shot Volume | cm^3 | 113 | 154 | 201 | ||||
SHOW WEIGHT(PS) | g | 103 | 140 | 183 | ||||
INJECTION PRESSURE | Mpa | 249 | 183 | 140 | ||||
THEORETICAL INJECTION RATE(PS) | g/s | 67.5 | 91.8 | 120 | ||||
PLASTICISING CAPACITY | g/s | 8.3 | 12.5 | 18 | ||||
SCREW TORQUE | N.m | 510 | ||||||
MAX.SCREW ROTATE SPEED | r/min | 260 | ||||||
INJECTION STROKE | mm | 160 | ||||||
CLAMPING UNIT | ||||||||
MAX.CLAMPING FORCE | KN | 950 | ||||||
MAX.OPENING STROKER | mm | 340 | ||||||
SPACE BETWEEN TIE BARS | mm | 360×360 | ||||||
MOULD HEIGHT | mm | 135~380 | ||||||
MAX.DAYLIGHT | mm | 720 | ||||||
EJECTOR FORCE | kn | 25.4 | ||||||
EJECTOR STROKE | mm | 85 | ||||||
EJECTOR QUANTITY | pc | 5 | ||||||
OTHER | ||||||||
PUMP MOTOR POWER | KW | 11 | ||||||
PUMP PRESSURE | Mpa | 16 | ||||||
HEATING POWER | KW | 7.3 | ||||||
HEATING ZONE | 4 | |||||||
SIZE | m | 4.25×1.2×1.8 | ||||||
NET WEIGHT | t | 3.2 | ||||||
OIL TANK CAPACITY | L | 260 | ||||||
INTERNATIONAL DESIGNATION | 950-280 |