Small mineral commercial wet stone gold grinder mill
Small mineral commercial wet stone gold grinder mill
1.Introduction of gold grinder mill
gold grinder mill is the best equipment to replace ball mill. because it have small investment, high output, low production cost, good efficiency and easy installation. And the machine is the ideal beneficiation equipment for small and medium-sized enterprise. gold grinder mill is mainly used to process the gold, silver, lead, zinc, iron, molybdenum, copper, antimony. The gold grinder mill is named by the diameter of roller. Φ1300,Φ 1350,Φ 1400,Φ 1500,Φ 1600 is suitable for selection of iron ore, molybdenum ore ,lead ore ,zinc ore, antimony ore and so on. Φ 850, Φ 900, Φ 1000,Φ 1100,Φ 1200 is suitable for selection of gold ore. Above all, 1200a type is the most popular and widely use.
2.Working principle of gold grinder mill
It mainly consists of driving device, frame, water basin, grinding wheels and grinding base, etc. It grinds ores by wheel driving force: firstly, the power is transferred from the motor to the reducer, then to the horizontal shaft, and finally to the grinding wheel; the wheels then rotate anticlockwise. The wheels can revolve around the vertical shaft of the pan mill, at the same time, it can revolve on its own axis, while the grinding base will remain still. The ores are then pressed, rubbed and grinded repeatedly.
◊ This machine is not allowed to state with the material in the machine. If the machine is stopped because of stoppage, the residual material in the machine should be cleared. Then start the machine again.
◊ The material should be put into the machine uniformity, not sometimes much sometimes less. It's better to use a feeding equipment.
◊ The bearing part should be add butter regularly.
◊ Every bolts should be checked to avoid flexible.
◊The bearing should be changed in time if it is damaged to avoid damage other parts.
◊ While the machine is running formally, you should check if there is abnormal sound in the reducer box and or bearing part, if there is a too high temperature, if there is too big motor current and so on. If it happened, you should stop the machine to remedy of the trouble.
◊ The motor V-belt should be removed while examine and repair the machine for your safe.
| Type | YM-900 | YM-1100 | YM-1200A | YM-1400 | YM-1600 |
| Roller diameter | 900±20mm | 1100±20mm | 1200±20mm | 1400±20mm | 1600±20 |
| Pan diameter | 1700±30mm | 1800±20mm | 1800±20mm | 2000±20mm | 2100±20mm |
| Milling groove width | 200mm | 250mm | 270mm | 360mm | 500mm |
| Speed of plate | 13-18r/min | 13-18r/min | 13-18r/min | 16-18r/min | 20-22r/min |
| Power | 3kw | 5.5kw | 7.5kw | 15kw | 30kw |
| Weight | 3t | 4.5t | 6t | 9.5t | 16t |
4.The feature of gold grinder mill 1100
◊low investment and low consumption
◊ large production capacity and good efficiency
◊ easy installation and maintenance
◊sturdiness and durability
5.Pictures of gold grinder mill
♦Wire cables are used for fastening the machines.
♦FCL: Shipping by a standard exporting container.
♦LCL: Poly-wood case.
After-sales service
Qimai can provide turkey service for customers, such as engineering consultation, engineering design, equipment manufacturing, packing & transportation, installation & commissioning personnel training etc.
About Training
Qimai machinery could offer excellent facilities and comfortable environment and training services to different customers. The training should include product training, safety training, operation training, maintenance know-how, technical know-how training, and regulations training, etc. All of the training is customized to fulfill every customer’s expectations. Training programs can be conducted in our workshop, or at customer’s site.
About Installation and Commissioning
Qimai is able to guide the overall installation of whole set production line, including crushing production line and cement equipment production line, etc., which will allow you to start the normal operation of equipment immediately. After installation,we will make inspection of the whole machine commissioning and operation condition and provide you testing data report of installation.
Henan Qimai Mechanical Equipment Co.,Ltd
Our company is a professional manufacturer of gold grinder mill machine,charcoal making machine, carbonization furnace, dryer machine, wood working machine and construction machine, etc, which integrating the development, production and sales as one.Our headquarters is located in Yangli Industrial Park, Yugou Town, Gongyi City, covering an area about 30000 square meters. Since established in 1990, our factory has been adhered to scientific management methods and introduced an advanced technology and process from the United States, Germany, Japan and other countries to establish internationally advanced production lines and a first-class modern detection base
1,Do you provide the installation service after ordering your machines?
As for the single machine, we provide the users instruction. As for the production line,we provide the professional construction drawing, and arrange the engineer guide the user install the machines.Help the user train the skilled workders.
2,Can you be sure the wearing parts supply in future?
We promise to provide the wearing parts to user in future.
3,How about the warranty of our machines?
Our production line, and single machine's warranty is 1 year.
4,Do you allow us to visit your factory for try some machines?
We warmly welcome the clients to come to our factory for trying each machine.
5,Can we see some fertilizer plant with your machine?
We can take the customer to visite some fertilizer plants with our equipements.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier