Small Pump Diesel Transfer Pump Kit 12 Volt DC Portable Fuel Self Priming Oil Pump
220v Electric Oil Fuel Bio Diesel Gas Transfer Pump
Want a portable Fuel Transfer Pump to take the hard work out of pumping oil? This pump is perfect for you! Just place the hose into the fluid, the pump can do all work for you, transferring kerosene, oil and diesel fuel, minusing the mess and hassle, save you lots of time.
The self-priming diesel pump has hoses and fuel nozzle ready for immediate use. The engine output amounts to 550 Watt and the pump reaches a flow rate of 3600 l/h at a rotational speed of 2800 rpm.
New Diesel Transfer Pump 220V, a practical solution to extract oil, diesel, biodiesel etc from your vehicle without mess or specialised tools. Simple to use, competitively priced and ideal for the on-site transfer of diesel from barrels and drums to diesel powered vehicles and equipment. This pump has a high flow rate or 60 L/min (3600 L/hour). Thanks to its ON/OFF switch the pump is easy to operate. The pump can be used as a fuel supply device for field-working vehicles like engineering vehicles, excavators, bulldozers, road rollers, cement mixers, lifters, trucks, fuel compressors, mining machinery and farming machinery. An ideal solution for refilling machinery that has no access to fuel pumps.
Product Features:
- Set up in seconds,simple,convenient and easy to use.
- Accurate control, works clean and fast.
- Built-in Bypass Valve helps to avoid overheat or overload.
- High quality Steel-Wire-reinforced inlet hose.
- Compatible with Oil, Diesel, Bio-diesel or Kerosene.
- Suitable for both movable application or permanently installed use, perfect for home,business and commercial use.
- Can be used as a fuel supply device for field-working vehicles like engineering vehicles,excavators,bulldozers,road rollers,cement mixers, lifters, trucks,fuel compressors, mining machinery and farming machinery.Also ideal for filling or emptying diesel and oil storage tanks.
- Self-Priming
- Low voltage start
- 550 W powerful motor
- Low voltage start
- Capable of continuous work
- Transfer up to 60 L per minute
- Low working noise
- Pump set with liter counter
- Sensitive switch for precise control
- CE approved
Note:
1. Please don't use it for petrol,engine oil,water,flammable or low flash point liquids.
2. Please don't use in rainy open air.
3. Please make sure it works with the filter.
The oil pump is indispensable wherever diesel oil must be transferred from drums and tanks.It is also suitable for bio-fuel,cooking oil and vegetable oil.It is applicable to oil warehouse,dock,shipping,factory,farmland and mine.
Technical Data:
- Product Name: 220V Metering diesel transfer pump
- Pump Head Material: Cast iron
- Pump Body Material: Aluminum
- Rear Cover Material: Aluminum
- Protection cover Material: Cast iron (electroplate)
- Stator Material: Magnetic steel
- Coil Material: 100% Copper
- Motor: Single-phase permanent magnet motor
- Filter Material: Plastic ( POM)
- Inlet and outlet joint Material: Cast iron (Copper Plating)
- Seal Material: NBR
- Plug: English-style( 3 line)
- Flow Meter: 4 digit mechanical Flow meter
- 3/4" Outlet hose with 1" male thread: 4 m(Rubber, Black)
- Oil Nozzel: Aluminum (Hand)
- Framework: Cast iron
- Voltage: 220 V
- Power: 550 W
- Speed: 2800 R/min
- Inlet diameter: 25 mm
- Outlet diameter: 25 mm
- Output flowing: 60 L/min
- Suction: 5 m
- Inlet Hose Length: 2 m
- Head: 10 m
- Cable Length: 1.3 m
- Self-Priming: YES
Package Included:
- 1 x Oil Pump Transfer
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier