Small Induction Heater Hardening Heat Treatment Furnace
Small Induction Heater Hardening Heat Treatment Furnace
All solid stage IGBT inverter and functional regulation, soft switching dual resonant frequency control and auto- tracking techinology are the high-reliability assurance.
Ultra-small volume, saving customers 10 tmes of the production space.
Eficiency, within the framework of full power, high power factor and power efficiency.
Boadand 1-20KHZ frequency automatic tracing adapting .
100% full load 24hours of continues work.
Constant output voltage/ constant output power control feature selected.
Frequency, power, voltage and current are whole showing.
Main application characteristics:
DDCGP-30 DDCGP-40 series are suitable for many applications, for example,
(1)Heat treatment of gear shaft
(2)steel stainless steel screw coating
(3) floating melt for institute or college research
(4) tiny or powder material melting
(5)copper joint brazing so on.
Due to the adopting of our third generation inverting control technology, DDCGP-30 DDCGP-40 series machines are characterized not only with high power high frequency up to 250-300KHZ output, but also with high reliability on the condition of normal IGBT module.
Main parameters:
Model: |
DDCGP-10 |
Maximum power: |
10KW |
Input voltage scope: |
Three phases 340-420V |
Input voltage frequency: |
50HZ-60HZ |
Output oscillating frequency: |
50KHZ-300KHZ |
Heating,retain\cooling time: |
0.1S-99.9S |
Duty Cycle: |
100% |
Cooling water flow rate: |
0.2Mpa ≥ 5L/MIN |
Cooling water temperature: |
<45℃ |
Weight: |
30Kg |
In the high frequency heating machines, series oscillating circuit is applied as circuit below, through high frequency transformer, low voltage and high current power is output to go through the induction coil. DD-15 and DD-25 series machines are the first models developed in our company, DD-15 uses MOSFET components and DD-25 used IGBT components, both use our first generation inverting control technology, the machines are featured with simple structure, high reliability and low price, and they are easy to use and to repair, and are now the most widely used machines both in China and abroad.
Product Features:
1. Adopt imported high-quality IGBT power components the third generation current transformer control technology,ensure its high reliability less maintainance cost;
2. High quality IGBT power components ensure its working frequency up to 300KHZ. It’s the most advanced technology.
3. 100% full load can work 24 hours with the maximum power.
4. The heating performance will be more profect due to constant current & constant power control function;
5. Display of output power,frequency current;
6. Simple convenient installation, only connected with power water,professional preservation is not required
7. Convenient for maintainance as its small volume;
8. The heating,retain power time can be adjusted of this automatic control type,this can help to improve heating repetitiveness,simplify h operation.
Main application characteristics:
DDCGP-30 DDCGP-40 series are suitable for many applications, for example, (1)Heat treatment of gear shaft (2)steel stainless steel screw coating (3) floating melt for institute or college research (4) tiny or powder material melting (5)copper joint brazing so on.
Due to the adopting of our third generation inverting control technology, DDCGP-30 DDCGP-40 series machines are characterized not only with high power high frequency up to 250-300KHZ output, but also with high reliability on the condition of normal IGBT module.
Main parameters:
Model: |
DDCGP-10 |
Maximum power: |
10KW |
Input voltage scope: |
Three phases 340-420V |
Input voltage frequency: |
50HZ-60HZ |
Output oscillating frequency: |
50KHZ-300KHZ |
Heating,retain\cooling time: |
0.1S-99.9S |
Duty Cycle: |
100% |
Cooling water flow rate: |
0.2Mpa ≥ 5L/MIN |
Cooling water temperature: |
<45℃ |
Weight: |
30Kg |
DDCGP-10,DDCGP-20 Advantages applications of models with Timer function:
1. Heating power, retaining power, heating time, retaining time can be preset adjusted, this makes it possible to control the heating curve heating time.
2. It is suitable to use in the repeated heating or high speed heating of small parts;
3. When using in brazing, with proper timing parameters, rapid heating retaining can be achieved to keep the temperature while the brazing material is melted then to let the brazing material spread smoothly to form good joint.
Inside the DDCGP-10 DDCGP-20 series machines, IGBT module our third generation inverting control technology has been used, that is the soft dual control inverting technology. In this technology, output power frequency can be controlled adjusted separately, IGBT module soft switching control technology are used in the high frequency switching circuit to control the output power. In the inverting circuit, the IGBT frequency tracing circuit is applied to achieve high speed accurate soft switching control. The adoption of new technologies not only improves the quality reliability of the machine,but also solve the technology problem on large power induction heating machine makes it possible to work 100% duty cycle.
Inside the DDCGP-10 DDCGP-20 series machines, oscillating cap is connected to the secondary coil of the transformer, so the voltage on the primary coil of the transformer is low problems caused by high voltage such as sparks insulations are solved thoroughly to increase the reliability quality of the machine. At the same time, the transformer is light small sized with low energy consuming.
Q1: What does your factory produce ?
A: We produce and export all kinds of induction heating machine. We also design and develop the induction heating machine according to your requirements.
Q2: What about your standard delivery date ?
A: if have storage will be 1day.if have to produce 7-10 days. Our company provide just-in-time delivery.
Q3:Do your factory sale directly ?
A:YES,it is our factory sale directly,competitive price with high quality and excellent after-sale service. We established in year 1996.
Our quality products have been export to many countries,such as Germany,Russia,USA,Canada, Argentina,Peru,Turkey,Brazil,Spain,South Asia and Middle East countries.
Q4: Do you have CE Certificate?
A: YES,we have.
Q5: Where are your factory?
A:Our factory located in Shenzhen city, convenient in air, sea shipment.
Q6: If the machine get damaged, what can I do ?
A: In the guarantee time (1 year) , we will send the spare parts to you for free. And provide the technical consultant for anytime.if more terrible,we can send our engineers to your factory.
We will provide same good after-sale service as the pre-sale service, any of your questions will be replied within 8 hours.
in order to get more specified product information reply, please provide us information below in your inquiry.
1.what do you want to do with the induction heating machine? forging/melting/casting/annealing or others?
2.what material you want to operate?
3.what is the operation size of your material? if want to melt, what is the weight fo your material?
4.how fast you want to operate one material?if not sure, we will suggest.
5.what temperature you want to operate the material?if not sure, we will suggest.
ATTENTION:
1.we do not provide instant quotation as we have to make sure the product can actually solve your problem.
2.If you are professional in induction heating machine, tell us the frequency and your business information, we will send you quotation accordingly.