Six Hole Air Control Dump Truck Valve 6CV-D-N With PTO Function Aluminum Alloy

Six Hole Air Control Dump Truck Valve 6CV-D-N With PTO Function

Description

1.Power: Hydraulic
2.Material: Aluminum
3.Automatically locked in stop and fall position
4. Working medium:Air
5.Operating pressure(Bar): up to 12
6.Working temperature: -40℃-80℃

Product Features
1.Body Material: Aluminum
2.Seal Material: HNBR
3.Working Pressure: 0.5-12 Bar
4.Ambient temperature: -55℃-180℃
5.Port Size: M10*1

6.Transposition clearly
7.Automatically locked in stop and fall position
8.Able to coordinate with the Pneumatic control valve
9. Small Operating force
10.Simple operation
11.Easy to install

Assembly instruction
1.Mount washer plus self locking nut on the threaded ends.
2.Fit the O-ring in the extra section and shift the first section on thethreaded ends .
3.Fit the threaded ends into the main section and tigthen themwith a adjustable pipe wrench
4.Fit this screw with some hydraulic sealant in the end section .
5.Fit other sections in the same way
6.Remove internal hexagon screw M5 frommain section to open the P-line tothe extra section

Note:
The air supply must always be tapped off from aaccessory air tank or auxiliary valve and the pneumatic system must be protected with a chargingvalve.Use always rubber grommets to protect air tubes and to prevent that dust and water enters the cabin.
For trouble free life of the entire pneumatic system the air system must be free from water.

Specifications