Sitting drive Type Road Strip Line Painters
It can be used for parking line, sports ground line, airport line, traffic line etc . |
Hand-Push Thermoplastic Road Line Marking Paint Machine Width is 100, 150, 200, 300mm, and thickness is 1.8-3.0mm through adjusting the screeding knife. |
1. It is suitable for city road and highway small road marking work. |
2. The advanced driving system can control the forward, reverse and stop. |
3. The sreeding marking shoe makes the marking line beautiful. |
4. The automatic quantitative glass beads dispenser makes the glass beads spraying even and saving. |
5. The back fixed caster makes the machine go straight and turning freely. |
6. The standing trailer, electric start, warning light and lighting lamp is optional. |
Main Parameters of Sitting drive Type Road Strip Line Painters
Engine |
Kohler 6.0HP or Robin 6.0HP gasoline engine |
Driving speed |
Original variable speed transmission system |
Paint tank capacity |
65L |
Glass beads bin |
14L |
Heating mode |
Fuel, liquefied gas stove |
Marking equipment |
Screed type ,standard 150mm |
Marking width |
100mm,200mm,250mm,300mm (according to customer’s requirement ) |
Marking thickness |
1.8-3.0mm(adjustable) |
Dimensions (L*W*H),Weight |
1350×1000×1100m.230kg |
Optical system |
Standing trailer, electric start, warning light , lighting lamp |
Company Information
Our Factory
Packaging & Shipping
Wooden package for Sitting drive Type Road Strip Line Painters
JILI machinery supply three kind of road marking paint machine according to the paint material :
1. Thermoplastic road marking machine series; |
2. Cold paint road marking machine series |
3. Two-component road marking machine series |
According to different marking ways , the thermoplastic road marking machine can be divided into 3 type: |
1. Thermoplastic screeding type |
2.Thermoplastic extrusion type |
3. Thermoplastic spraying type |
The working type could be driving type marking, self propelled type marking or hand push marking . |
The thermoplastic road marking equipments needs a set of numerical equipments to compelet the construction . |
It is usually including the following parts. |
1. Thermoplastic pre heater |
2. Road marking machine |
3. .Pre-marking machine |
4. Primer |
The cold paint road marking is different from thermoplastic road marking . It can complete only by one unit road marking machine. |
It can be divided into high pressue airless type and low pressure air spray type . |
The working type could be driving type marking, self propelled type marking or hand push marking |
We would like to be helpful for your road constricon.
Any question or need, pls contact us...