Sinotruk HOWO 4x2 5T 8M3 garbage compactor truck, Sinotruk HOWO 6-wheel 8M3 compression garbage truck 5T waste collector trucks for sale
Garbage Compactor truck is the machinery of choice for door to door collection of waste.
The collected waste is simultaneously compacted and eventually transported to the dumping site.
Compactors have multiple benefits over conventional waste trolleys namely: Waste is covered and there is no chance of "spillage" of waste during transportation. Continuous compaction allows more waste to be stuffed onto a truck which reduces the number of round trips to the dumping site. This results in significant fuel saving. Waste collected inside the compactor is pushed out of the container through a hydraulically powered Ejection Plate. Two men are required to perform the entire functionality of the compactor namely, driver and operator.
HOWO compressed garbage truck highlights :
1. High compression ratio and large loading capacity: the maximum crushing pressure is 12 tons, and the loading capacity is equal to twice and a half of the uncompressed waste discharged in the same tonnage.
2. Operation Automation: With the computer control system, the driver is required to operate all the loading and unloading operations. Two operation modes, automatic and semi-automatic, can be set up, which not only reduces the labor intensity of sanitation workers, but also greatly improves the working environment.
3. Good economy: When the special equipment works, the computer control system automatically controls the throttle.
4. Double insurance system: The operation system has dual functions of computer control and manual control, which greatly ensures and improves the utilization rate of vehicles.
5. Flipping mechanism: Flipping mechanism with garbage can (or bucket) can be optionally assembled.
Product display:
Cabin | Driving type 4x2 | ||
2080 Standard cab, with three seats,with sleeper ,with A/C. | |||
Vehicle Main Dimensions | Overall dimensions (L x W x H)mm | 7450x2450x3100 | |
Wheel base (mm) | 4200 | ||
Wheel track (front/rear) (mm) | 1798/1764 | ||
Approach/Departure angle(°) | 27/20 | ||
Weight in KGS | Tare Weight | 6400 | |
Loading Capacity | 5000-10000 | ||
Front axles loading capacity | 1x3500 | ||
Rear axles loading capacity | 1x8500 | ||
Max. driving speed(km/h) | 90 | ||
Engine | Brand | YUChai | |
Model | YC4E160-33 | ||
Type | 4-stroke direct injection , 4-cylinder in-line with water cooling, turbo-charging and inter-cooling | ||
Horse Power(HP) | 160 HP | ||
Emission standard | Euro 3 | ||
Gearbox | WLY6T51 , 6 forwards &1 reverse | ||
Clutch | Diaphragm spring clutch | ||
Steering Gear | Power steering | ||
Fuel tank (L) | 120 L | ||
Tire | 8.25R20 All radial tires with one spare, 7 pieces | ||
Compression garbage box body system | |||
BodyVolume | 8 CBM | ||
Cycle Time of Filling(S) | ≤40 | ||
Lifting Time of Filler(S) | 8 to 10 | ||
Time of Discharging | ≤60 | ||
Working Pressure(MPA) | 16 | ||
Composed by hermetic garbage tank, hydraulic system, operation system. The entire truck is hermetic, can automatically compress and dump the garbage .and the sewage generated in the process of the compression all go into the sewage tank. |
Shipment by different vessels
Your are always welcome to visit our factory at any time.
For more information for trucks and trailers, please contact:
Kelly(@)cs-vehicle.com
HuBei ChuSheng Vehicle Co., Ltd.
Mob/Whatsapp: +86-13659813873
Factory: NO.9, Jiliang Avenue, Suizhou Economic Development Zone,Suizhou, Hubei, China
Office: Room 1108, Eurasia Plaza, No.20 Jinyinhu Road, East- west lake District, Wuhan, Hubei, China.
Web: csctruck.en.made-in-china.com