Single phase ups 220 volt uninterruptible power source 10 kva
Single phase ups 220 volt uninterruptible power source 10 kva
MP1100 series UPS is to adopt global most advanced DSP digital control technique, with voice call send-alerting alarming function, high-speed microprocessor(MCU), programmable logic device(CPLD), the sixth generation IGBT and static state switch are dissipation with exhausts HP high power, which enter into deduce digital ages of classic legend, bring up with the big capacity, high reliability, stability of function to reside global top-grade level.
MP1100 series UPS are widely used in the network office environment of following sides such as BC billing center of communications, BCS BTS communication station, the banking business outlets, ATM the cash dispenser, stock exchange firm, transportation, electric power, industry and any other profession vocation.
Main Features:
Full digital control technology and intelligent digital designing.
1. Advanced digital circuitry system to stable operation: MP1100 series UPS use advanced digital circuit system take the place of traditional artificial circuit, which under digital circuit with high speed microprocessor MCU control, to have parameter setting through programmable logic device, in order to have perfect operational management, then Self-test and self-detective analysis become more stronger.
2.Intelligent Battery Management: MP1100 series UPS import advanced intelligent Battery management system, it can automatically adjust battery charging parameter according to the user's battery configuration, and it based on the power supply environment to carry on float charging conversion, temperature compensation charge and discharge management into Battery. Moreover, MP1100 series UPS detect to manage the battery operation status through monitoring interface, which to insure the battery operated highly effectiveness. Intelligent battery management system is not only to reduce the administrator's burden, but also to extend the battery usage rate more than 55%.
3. Intelligent detection system full protect whole operation status: The system's MCU uninterruptedly detected all power status, circuit breaker status, fuse status and all other circuits working status on-line. When UPS appear failure, the detection system is immediately alarming to inform the administrator, and synchronous to start UPS overall protect function.
4. Intelligent communication tool remote monitoring: RS232 and RS485 interface realizes multi-communication and long distance monitor; With optional SNMP card 100% carries out long distance supervision and network management; With optional dry contact connection interface adopted no source point, efficiently carries out the supervision and management of UPS status.
Adopt high precision SMD technology to make complete machine precision higher.
MP1100 series has changed the traditional plug-in processing circuit craft, all of them adopt high precision SMD technology, now that it already can save space and also eliminate the defect of traditional UPS circuit, it is convenient for improving safety operation of integrated circuit, and improving the reliability and operation precision at the same time.
MP1100 series comprehensively adopt SMD technology, high temperature resistant, high accuracy, wonderful filtering performance, more stable performance of complete machine, more durable, and usage rate is increased by 80%.
Based on the sixth generation of IGBT and high-speed static switch, the reliability of technology is higher.
IGBT is in the nature of good high-speed switching characteristics, which it has high voltage and large current working characteristics, and use the voltage type drive which need very small control power. The sixth generation IGBT has lower saturation voltage drop, inverter working efficiency is more higher, low heating-up, higher reliability and other characteristic.
Other features
1. Excellent load characteristics: It is completely satisfy to load from 0 to 100% load variation without switch to bypass, which to protect the output more stable and reliable.
2. Many kinds of system protection and alarming function: With the input/output over voltage and under voltage protection, input surge protection, phase sequence protection, battery overcharge and over discharge protection, output overloading short circuit protection, high temperature protection, and any other system protection with alarming function.
3. High-powered dynamic characteristics.
4. Optional input harmonic filter.
5. Optional battery process audit module.
6. Personalized Settings.
MP1100 Series Specification:
| MODEL | MP1104K | MP1106K | MP1108K | MP1110K |
| Capacity | 4kVA | 6kVA | 8kva | 10kVA |
| Power Watt | 3.2kW | 4.8kW | 6.4kw | 8kW |
| Working Principle | Low Freuqency Transformer Based True On Line-Double Conversion | |||
| RECTIFIER (INPUT) | ||||
| Phase | Single Phase | |||
| Input Power Factor | ≥ 0.9 ( Plus Filter) | |||
| Input Voltage Range | 220VAC (230VAC or 240VAC)±25% , 1P+N+PE optional 110V(120V or 277V ) | |||
| Input Frequency Range | 50Hz±10% / 60Hz±10% (Selectable) | |||
| Output Ripple | <2% | |||
| Soft Start | 0~100% 5sec | |||
| CHARGING | ||||
| Charging Mode | Constant current, then constant voltage, and charge with temperature compensation | |||
| Float Charging Voltage | 220VDC | |||
| Equalized Charging Voltage | 227VDC | |||
| Temp. Compensated Voltage | -3mV/℃/cell | |||
| Charging Current | 5-10A | |||
| BATTERY | ||||
| Type | VRLA/AGM/Gel, optional Lithium Battery | |||
| Battery Capacity | 7~999AH settable ( Configurate Battery Capacity according to Back-up Time ) | |||
| Quantity | 16units 12V or 96units 2V batteries (Battery Voltage 192VDC) | |||
| Temperature | 20ºC~25ºC (For Maximum Efficiency) | |||
| INVERTER (OUTPUT) | ||||
| Phase | Single Phase | |||
| Nominal Voltage | 220VAC (230VAC or 240VAC), 1P + N optional 110V(120V or 277V ) | |||
|
Output Voltage Regulated Accuracy |
±1 %( Stable load), ±3%( fluctuant load) | |||
| Output Frequency Range | 50Hz 60Hz<±0.5% ( Asynchronous ) | |||
| Crest Factor | > 3:1 | |||
|
Output Total Harmonic Distortion (THD) |
Pure Sine Wave, Linear Load < 3%, Non-Linear Load<5% | |||
| Dynamic Characteristics | Instant voltage<±5% ( from 0 to100% ), Instant recover time<10ms | |||
| Overload Capacity | At 115% load, normal work, At 125% load 10 min, At 150% load 1min, At 200% load 1S | |||
| Inverter Efficiency | >92% ( full load ) | |||
| BYPASS | ||||
| Phase | Single Phase ( P+N ) | |||
| Nominal Voltage | 220VAC (230VAC or 240VAC) optional 110V(120V or 277V ) | |||
| Transfer Time | 0ms( adopt static switch ) | |||
| PROTECTION FUNCTION | ||||
| Input Protection | Input voltage, frequency over limited protection | |||
| Output Protection | Over current, short circuit, over voltage, low voltage | |||
| Battery Protection | Over charge, over-discharge protection | |||
| Temperature Protection | Environment over temperature protection, inverter over temperature protection | |||
| Hardware Fault Protection |
Assistant power abnormal, breaker cut off, breaker overload, power devices over current/over voltage etc. protection |
|||
| GENERAL SYSTEM PARAMETERS | ||||
| Working Environment |
Temp: -10~40ºC, relative humidity: 30%~90%, Altitude<2000m ( 1% decrease against 100 meters’ rise, Max. altitude 4000m ) |
|||
| Cooling Method | COMPULSIVE VENTILATION | |||
| Communitation Interface | RS232/ RS485, optional dry contact, SNMP card ( for remote control via internet ) | |||
| Parallel Operation | Tandem hot backup | |||
| Auti-surge Capacity | 10/700μS, 5KV; 8/20μS, 20KA | |||
| Protection Level | IP21 | |||
| Safety Performance | Vin-n Vout-n 2000Vac, creepage<10mA , insulating resistance>2MΩ(500VDC) | |||
| Noise (dB) | 50-55 | 55-60 | ||
| Dimension (W*D*H) mm | 220*520*640 | 220*500*760 | ||
| Weight (Kg) | 59 | 65 | 84 | 9 |
Standard Export Wooden Box Package, One Piece Per Box.
Trade Terms:
- Payment: T/T, Western Union,L/C
- Delivery Time: 15-25 days
Why Choose us?
- We are China Leading UPS and inverter Manufacturer.
- Alibaba Assessed 3 years Gold Supplier.
- Inspected by the Inspection Institution of Bureau Veritas Certification.
- 100% QC inspection Before Shipmeng.
- Best Quality & Best Service with Competitive price.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier