General
Single phase electronic prepayment front board installed active energy meter is a kind of
single phase two wire active energy meter which purchase electricity by IC card, electric energy measuring, load control
and using electricity management. The meter completely accord with relevant technical requirements of class 1 single
phase active energy meter stipulated in international standard IEC 62053-21. It can accurate and directly measure 50Hz
or 60Hz active energy consumption from single phase AC electricity net, it is use for setting indoor or outdoor meter box.
This meter has LCD display power. It has following features: good reliability, light weight, specious nice appearance,
convenient installation, etc.
Functions & features
·Standard configuration one meter one card, can repeat input money from PC machinery which with IC programmer, may
select one-time recharge card. (Please specified when ordering).
·It has IC card with code and data against false, standard configuration use storage IC card, may select non-contact RF card.
Standard configuration payment by kWh, may select payment by money. (Please specified when ordering).
·Standard configuration of the prepayment management system use of single version, may select network version. (Please
specified when ordering).
·It has load control and function of automatic fault detection and instructions, standard configuration without function of open
terminals cover and detection, may select open terminals cover and cut power. (Please specified when ordering).
·Standard configuration 7 LCD digits display, 6+1 digits display (999999.1kWh), may select 5+1LED digits display.
·A port of pulse output passive closed (polarity), complying with standard IEC 62053-31 and standard DIN 43864.
·Three LED instructions power supply state (green), signal of energy impulse (red) and direction of the flow of load current (yellow).
Automatic detection the direction of the flow of load current. When the yellow LED display, that is meaning the direction of the flow of
load current reverse.
·Single direction single component measure single phase two wire active energy consumption. It is nothing with direction of the flow of
load current. Complying with standard IEC 62053-21.
·Direct connect operation, there are two types wiring you may select.
·Front board three fixed installation, standard configuration extension terminals cover, in order to protect to use safety, may select short
terminals cover.
Technical parameter
Model |
Accuracy |
Reference Voltage (V) |
Current specifications(A) |
Starting current (A) |
Insulation performance |
DDSY791 |
Class 1 |
220v/110v |
1.5(6) 2.5(10) 5(20) 10(40) 10(60) 15(60) 20(80) 30(100)
|
0.4%Ib |
AC voltage 4kv for 1 minute,1.2/50us wave form impulse voltage 6kv |
Drawing & wiring