Silver-silver chloride (Ag-AgCl) reference electrodes
Silver-silver chloride (Ag-AgCl) reference electrodes
Cathodic protection systems installed on steel structures in seawater need to be monitored and it is usual to use an Ag/AgCl reference electrode to measure the steel to electrolyte potential to determine the level of corrosion protection being afforded to the structure.
Portable Ag/AgCl reference electrodes are also used to measure structure/electrolyte potentials on steel structures in seawater to which cathodic protection has not been applied to determine if the structure is freely corroding or not.
SILVION manufacture and supply two types of Ag/AgCl reference electrodes for use in seawater. Type SW100 is a weighted portable electrode generally used to measure structure/electrolyte potentials at key selected test points where the electrode can be suspended and dropped from deck level into the water close to the structure. Type CCS1 permanent electrodes are generally installed below the low water level at pre-determined locations and used as sensing electrodes to control the output of the DC power supply. Type CCS1 can also be used as a portable reference electrode.
Contact us or send us your detailed requirements for reference electrode, whether it's permanent for portable type.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier