Product Type | General Molding Products | ||||||||||||||
Product Model | TBL-520 | TBL-530 | TBL-540 | TBL-550 | TBL-560 | TBL-570 | TBL-580 | ||||||||
Appearance | Translucent | Translucent | Translucent | Translucent | Translucent | Translucent | |||||||||
Williams Plasticity | 80-100 | 110-140 | 120-160 | 150-190 | 190-250 | 210-270 | |||||||||
Density(g/cm3,25℃) | 1.03-1.07 | 1.05-1.15 | 1.11-1.16 | 1.13-1.17 | 1.15-1.18 | 1.19-1.22 | 1.22-1.25 | ||||||||
Vulcanization | Type | C-6 | C-6 | C-6 | C-6 | C-6 | C-6 | ||||||||
Dosage (%) | 1% | 1% | 1% | 1% | 1% | 1% | |||||||||
Linear Shrinkage(%) | 3.3-3.7 | 3.4±0.2 | 3.4±0.2 | 3.4±0.2 | 3.4±0.2 | 3.4±0.2 | 3.4±0.2 | ||||||||
Hardness (Shore A) | 21-24 | 30±2 | 40±2 | 48-53 | 60±2 | 70±2 | 80±2 | ||||||||
Tensile Strength (MPa) | ≥4.0 | ≥6.0 | ≥7.0 | ≥7.0 | ≥7.0 | ≥6.5 | |||||||||
Elongation(%) | ≥750 | ≥650 | ≥500 | ≥400 | ≥350 | ≥200 | |||||||||
Tear Strength(KN/m) | ≥10 | ≥14 | ≥16 | ≥18 | ≥19 | ≥13 | |||||||||
Compression Set(%) | / | ≤6 | ≤5 | ≤6 | ≤6 | ≤7 | |||||||||
Temperature Tolerance (200℃/2h) | No obvious yellowing |