Typical performance | Test methods | CR® TM-Putty-101 | CR® TM-Putty-102 | CR® TM-Putty-103 | ||
physical performance | color | visual | white | white | Light Grey | |
Extrusion rate, 4.0Mpa | Density,g/cc, ±0.2 | ASTM D792 | 3.1 | 3.2 | 3.2 | |
Typical thickness after compression | Extrusion rate,g/Min,13#syringe needle,90psi air pressure | / | 20 | 20 | 20 | |
Electrical properties | Shore OO Hardness | ASTM D2240 | 0 | 0 | 0 | |
Volume resistivity | Typical thickness after compression,mm | / | 0.1 | 0.1 | 0.1 | |
Shielding effectiveness (2GHz~18GHz), Min. | Thermal conductivity, W/(m.K) | Hot disk | 3.5 | 5.0 | 6.5 | |
Thermal Performance | Thermal impedance, ℃-in2/W, @0.5mm, 50℃,10psi | ASTM D5470 | 0.020 | 0.012 | 0.010 | |
Electronic property | Working Temperature, ℃ | / | -55~200 | -55~200 | -55~200 | |
density, ±0.1 | breakdown voltage,KV/mm | ASTM D149 | 6 | 6 | 6 | |
Shore OO hardness, ±2 | Volume resistivity,Ω.cm | ASTM D257 | >1013 | >1013 | >1013 | |
Working temperature | Flame retardant grade | UL94 | V0 | V0 | V0 | |
General performance | RoHS | / | Accord with | Accord with | Accord with | |
Quality guarantee period | Quality guarantee period | / | 24 | 24 | 24 |