Shutter Flat Utilitech Fan Blower

Shutter Flat Utilitech

• Large quantity in stock,  Click here for quick quotation within 2 hours

Click here for more technical supports from our  engineers.

We are factory and able to manufacture according to your requests !

Feature :

• IP 55/65

•   50hz/60hz

• Corrosion Proof

• 220v/380v/415v/440v/660v/1140v

• 1450RPM/960RPM/720RPM/590RPM

• High Temperature Proof (up to 500 °C )

• Each's impeller has been well dynamic balanced .

Structure

♦ Impeller Type:  Backward/Forward/ radial blade

♦ Driving Mode: Direct/belt/Coupling drivetrain

♦ System Type: Single inlet type, Overhang type.

♦ Cooling Type: Air cooling/Circulating Water cooling

♦ Bearing Lubrication Methods: Grease lubricating/Oil bath lubrication

Motor Brand:  ABB / /Baldor / Teco/    Motor 

♦ Basic Components: 

Motor, Impeller, Impeller cone (Air Inlet), Case, Main shaft, 
Bearing, Bearing housing, Pin coupling, Foundation bolt. 

System monitoring Instrument, Lube system, Overhead lube tank... 

  Characteristics   

♦ Outputting higher gas pressure, and providing larger air flow volume, low noise.

♦ Blades angle going through optimizing design, higher wear resistant, longer service life.

♦ Can flexibly adjust's volume and pressure in running by air damper. Can also adjust's pressure and volume by changing the speed via matching variable frequency motor.

♦ In the case of using system base, so easy for installation, no need of professionals direction.

♦ Transmission efficiency higher than belt driving's, much lower of system energy loss.

♦ Flexible connection for motor shaft and transmission shaft, no need to tension or change the belt, low maintenance work  exhaust
.

♦ Fan system whose impeller's diameter below 1400mm, is not needed to match bearing cooling device, can reduce the customer's cost and maintenance work.

♦ Can satisfy different dust loading conditions that low dust loading to a good deal dust loading, the surface hardness of impeller can to HRC60~70 after special processing, greatly extending impeller's service life.

♦  Using liquid lubricating oil, no need to open bearing housing when changing or filling lubricating oil. Easy to observe the lubricating oil's quality and stock through inspection window on the bearing housing bo dy of  exhaust

♦ Bearing housing reserves installation place for temperature and vibration sensors, can install easily of running monitoring device.

♦ Bearing housing adopt labyrinth type mechanical seal, unique design of spill prevention of inner, venthole design on top, commissure coated with sealing grease, completely eliminating bearing housing oil leak.

♦ Selecting high efficiency energy saving motor of Chinese leading motor manufacturer( or customer required), reliable quality, low energy consumption.

♦ The motor load can be automatically reduced when airflow resistance is increasing, to prevent motor from destroying.

♦ Customizing design according to customer's performance requirements, and optimizing by CFD technology, energy consumption lower than sames.

♦ Adopting high quality carbon steel manufacturing, or stainless steel and other metal materials according to customers' requirements.

♦ Fitting tightly of parts, good sealing, ensuring no reducing of output pressure.

♦ Impeller of annealing treatment, completely eliminating structure of internal stress when welding, ensuring impeller  appearance won't occur creepage and flaw.

♦ The welding line of impeller and main shaft passed ultrasonic flaw detection, ensuring no defect of welding and materials, guarantee strength.

♦ Impeller passed high standard dynamic balancing, ensuring stable running of.

♦ Running test and vibration value test fors after finishing manufacturing, ensuring running reliably.

♦ Various optional components for your selection.  

FAQ: 

1.Price Term:FOB,CFR,CIF.  Door to Door service 

2 .Professional engineers team will help you find solutions .

3.12 months warranty and long-term marketing, after-sale support.

4.Certifigation of Origin, Form A, Form E, Form B, Form P, Form F, Form N, Form X offered to Help you save duty cost.

5.24 hours service online, If any question, please contact with us freely by e-mail or telephone.

6. Our minimum order quantity is just only 1 piece, so you can order one sample to test quality ,if good ,can order more.

7. We have full stock, and can deliver within short time. Many styles for your choices. 

8. OEM and ODM order are accepted, any kind of logo printing or design are available.

9. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.