Feathurs:
This is a fully automatic battery charger with 7 charge stages.
Automatic charging protects your battery from being overcharged.
So you can leave the charger connected to the battery charger indefinitely.
7stage charging is a very comprehensive and accurate charging process that give your battery longer life and better performance compare to using traditonal chargers.
7Stage chargers are suitable for most battery types including calcium, Gel and AGM batteries. They may also help restore drained and sulphated batteries.
Specifications:
Model |
EPA1215 |
Type |
7-Stage Automatic |
Input Voltage |
220-240V~, Hz 110V~, 600Hz |
Input Power |
300W |
Output Voltage/ Current |
12V DC, 1500mA |
Minimum Start Voltage |
2V |
Current Fuse Rating |
250V AC, T 4.15A |
CHARGE CONRTOL |
|
Desulption |
Pulse charge to 11V |
Soft start |
Half the rated set current up to 12V |
Bulk |
15000mA (up to 14.4V) |
Absorption |
Constant voltage until current drops to 1.05A |
Bettery test |
Monitors voltage for 90 seconds |
Recondition |
Constant current (1.05A) up to 16V for 14 hours. |
Float |
13.8V also with pulse feature. |
Efficiency |
App. 85% |
Short Protect |
Short Circuit Protection |
Polarity Reverse |
Polarity Reverse Circuit Protection |
Non battery link protection |
Circuit protection |
Link battery type mistake |
Circuit protection |
Over voltage protection |
17.5 V |
Thermal Protect |
65°C +/- 5°C |
Cooling fan |
Automatic temperature controlled |
BATTERY RANGE |
|
Deep cycle |
50-140Ah |
Types of batteries |
Most type of lead acid batteries including Calcium, GEL and AGM. |
Dimension (L x W x H) |
190 x 115 x 62 mm |
Weight |
1.03 kg |
Connection:
1. Cut off the supplied battery clips; ensure you leave sufficient cable to reach the battery terminals. (DO NOT extend the battery
charger DC cables, as the added voltage drop will cause incorrect charging)2. Fit a ring terminal to the BLACK Negative (-) wire.
3. Connect the inline fuse to the RED Positive (+) wire.
4.Connect a ring terminal to the other end of the inline fuse.
5.Connect the RED lead (with inline fused and ring terminal) to the Positive (+) battery post.
6. Connect the BLACK lead (with ring terminal) to the negative (-) battery post.
7. Fit the correctly rated fuse.