Item | Unit | SYG-I-0516 | SYG-I-1016 | SYG-I-1516 | SYG-I-2016 |
Capacity | kg | 500 | 1000 | 1500 | 2000 |
Load Centre | mm | 400 | |||
Min.Fork Height | mm | 85 | 90 | ||
Max.Fork Height | mm | 1600 | |||
Overall Height | mm | 1980 | 1980 | 2080 | 2080 |
Fork Length | mm | 800 | 900 | ||
Overall Width | mm | 820 | 1000 | ||
Overall Length | mm | 1234 | 1325 | 1380 | |
Loading Wheel | mm | Φ75×42 | Φ80×60 | ||
Steering Wheel | mm | Φ180×50 | |||
Turning Radius | mm | 1250 | 1400 | ||
Adjustable Size of Fork | mm | 220-720 | 220-940 | 240-940 | |
Material of Mast | Beam Channel | ||||
Material of Wheel | Nylon/PU |
Hand manual Stacker
Condition | Propable Cause | Corrictiye Action |
Hydraulic unit does not lift
Once lifted truck lowers by itself
Fork does not lower
Lever does not set at NEUTRAL position | Oil low in tank
Steel ball not seated in hydraulic unit Worn o-ring in ram cylinder Steel ball not seated in hydraulic unit Worn o-ring in ram cylinder Relief valve not seated properly Relief valve not adjusted properly
Oil leakage from each valve cam broken Up-down cam nut out of adjustment Broken fork rods and linkage Up-down cam nut out of adjustment | make sure of no oil leakage from valve,and add oil. See"cleaning relief valve"in this manual.
Consult authorized repair station.
See"cleaning relief valve"in this manual. See"cleaning relief valve"in this manual. See"cleaning relief valve"in this manual. Reload truck within load capacity and adjust valve by pressure adjustment screw.
Tighten plug of each valve Replace cam chain Refer to"adjusting UP-Down Cam"in this manual. Replace broken parts Refer to"adjusting UP-Down Cam"in this manual. |