The Hydraulic CuttingUnit BC2 can be supplied with either scaling/grinding or rock cutting drums.
Maximum Input Power |
9,5 kW |
Maximum Flow |
60,0l/min |
Recommended Flow |
30,0 l/min |
Maximum Pressure |
225 bar |
Output Shaft Torque |
1.095 Nm @ 225 bar |
Pick Force |
8,11 kN @ 225 bar |
Output Shaft Speed |
98,0 rpm @ 30 l/min |
Pick Speed |
1,4 m/s @ 30l/min |
Unit Weight |
66 kg |
Excavator Range |
0,7 – 2,5 t |
No. of Picks |
50 (14,0 mm Shank) |
drum cutter
The advantage of products:
- Produce an extremely accurate profile in excavation and tunnelling work or in surface preparation.
- Reuse the finely grained excavated material for backfilling.
- Fewer vibrations reduce fatige when working.
- Reduce the risk of damage in and around the site.
- Use the cutting units in noise-sensitive zones, as they are relatively quiet to operate.
Why choose us?
1) The factory is in Shanghai,China with the R&D talents in this industry !
2) We could design the drawing according to the work condition! Customization ! You can get the drawing within 3 work days!
3) The components of the drum cutter are imported ! We never use the low price competition.
4) Simulation of the products application by 48 hours continuosly.
ZPMC,XCMG are all our clients.
Cooperate process
If you are looking for the supplier with: good and stable quality , independent design ability,fast lead time,and lower price than the europe brand , just connect with me !
Send your request and I will give you the feedback at once !
https://www.facebook.com/bett.transmission
https://www.linkedin.com/company/shanghai-bett-transmission-equipment-co-ltd/
www.bett-hyd.com