Product material |
food grade silica gel |
Product use | DIY hand - made drop glue mould |
High transparency, high mirror effect, make DIY more interesting. |
The production steps are as follows:
Main materials: mould,ab glue, measuring cup.
Tools needed: disposable gloves, toning cups, toothpicks, color concentrate, electronic scales, etc.
Production procedures:
Step 1:
Prepare the required raw materials: ab glue, mould, disposable gloves, mixing rods, measuring cups (all available in this shop).
Step 2:
Get ready for color concentrate.
Step 3:
Pour AB glue into 3:1 mixture and pour into the measuring cup, stirring slowly until clear.
Step 4:
After stirring, place for about 5 minutes to defoaming before use.
Step 5:
method 1:Pour the AB glue into the mold and drip the color into the measuring cup.
Step 6:
Follow method 1: also can use toothpick to draw some simple patterns, Touch a small drop of color with a toothpick.
Step 7:
Method 2: if you want to place flowers in the finished product, first pick the flowers and dry them with desiccant for a day or two. Put the dried flowers into the mould.
Step 8:
Stay at room temperature for 24 hours or so (slightly longer when the temperature is low).