Item | Unit | BL-HL-B80 | ||||
Guideway width | mm | 390 | ||||
Max. swing dia. over bed | mm | Φ800 | Φ800 | |||
Max. swing dia. over cross slide | mm | Φ560 | ||||
Max.swing dia. over gap | mm | Φ1000 | Φ870 | |||
Max.effective length in gap | mm | 240 | ||||
Center distance | mm | 2000/3000 | ||||
Max. turning length | mm | 1950/2950 | ||||
Max. Feeding force | Nm | 3500 | ||||
Spindle bore | mm | Φ82(Opt.:Φ105) | ||||
Spindle hole taper | / | MT6#(Φ52mm bore),Φ90 1:20(Φ82mm bore),Φ113 1:20(Φ105mm bore) | ||||
Spindle nose | mm | ISO 702/III NO.6(Φ82mm bore), ISO 702/II NO.8(Φ105mm bore) | ||||
Spindle speed range | rpm | 8~1400(24 steps,for Φ82mm bore), 30~1400(12steps, for Φ105mm bore) | ||||
Spindle max. output torque | Nm | / | ||||
Longitudinal rapid moving speed | m/min | 50hz:4.5,60hz:5.4 | ||||
Cross rapid moving speed | m/min | 50hz:1.9,60hz:2.3 | ||||
Longitudinal basical feeding | mm/r | 0.028~6.43(93 kinds)(for 82mm bore); 0.063~2.52(65kinds)(for 105mm bore) | ||||
Longitudinal reduce feeding | mm/r | 0.028~0.056(13 kinds) | ||||
Longitudinal enlarge feeding | mm/r | 2.86~6.43(15 kinds) | ||||
Cross basical feeding | mm/r | 0.012~2.73(93 kinds)(for 82mm bore); 0.027~1.07(65 kinds)(for 105mm bore) | ||||
Cross reduce feeding | mm/r | 0.012~0.026(13 kinds) | ||||
Cross enlarge feeding | mm/r | 1.21~2.73(15 kinds) | ||||
Upper tool post travel | mm | 145 | ||||
Lower tool post travel | mm | 320 | 310 | |||
Tool qty | / | 4 | ||||
Toolshank size | mm | 25×25 | ||||
Distance from spindle center to tool support face | mm | 28 | ||||
Max rotary angle scale of square tool post | / | ±90° | ||||
Travel of tailstock quill | mm | 150 | ||||
Dia. of tailstock quill | mm | Φ75 | ||||
Taper of tailstock quill | / | MT5# | ||||
Tailstock cross movement | mm | ±15 | ||||
Coolant pump flow | kw | 0.15 | ||||
Weight | kg | 3300/3700 | ||||
Machine length | mm | 3365/4365 | ||||
Machine width×height | mm | 1340×1490 |