Quick-reaction Sticky PE/PET membrane Self-adhesive Waterproof Membrane | ||||||||
Brand name | Wei Dun | Place of origin | Sichuan, China | |||||
Model number | WDSW-N | Type | Waterproof membrane | |||||
Thickness | 1.5mm,2.0mm | Width | 1000mm | |||||
Notes: Factory sell directly |
Executive Standard GB/T 35467-2017 | ||||||||
No. | Item | Index | ||||||
H(PET) | E(PE) | |||||||
1 | Tensile property | Tension/(N/50mm) | 300 | 200 | ||||
Elongation at maximum tension/% | 50 | 180 | ||||||
Phenomenon during stretching | No separation of adhesive layer from polymeric membrane | |||||||
2 | Tear force/N | 20 | 25 | |||||
3 | Heat resistance(70℃,2h) | No flow and dripping, with slip≤2mm | ||||||
4 | Low temperature flexibility(-20℃) | No crack | ||||||
5 | Water impermeability(0.3Mpa, 120min) | Water-impermeable | ||||||
6 | Peel strength between coiled material and coiled material(overlap edge)(N/mm) | No treatment≥ | 1 | |||||
Water immersion treatment≥ | 0.8 | |||||||
Heat treatment≥ | 0.8 | |||||||
7 | Oil penetration/number of sheets≤ | 2 | ||||||
8 | Holding power/min≥ | 30 | ||||||
9 | Peel strength with cement mortar/(N/mm) | No treatment≥ | 1.5 | |||||
Heat treatment≥ | 1 | |||||||
10 | Peel strength after immersing in water with cement mortar/(N/mm)≥ | 1.5 | ||||||
11 | Thermal aging(80℃, 168h) | Tension retention rate/%≥ | 90 | |||||
Elongation retention rate/%≥ | 80 | |||||||
Low temperature flexibility(-18℃) | No crack | |||||||
12 | Dimensional change rate/% | ±1.0 | ±1.5 | |||||
13 | Thermal stability | No bulking and flowing; the crimping of the edge of polymeric membrane or base does not exceed 1/4 of the side length at most |