Seismic detector for elevator and alert SesMo EQ

SesMo EQ seismic detector for elevator & alert

SesMo EQ seismic detector for elevator with triple axis sensor used
as elevator switch in case of earth quake of mass explosive.
SesMo EQ seismic detector for elevator incorporates two detection
technologies into one detector.

Quality seismic switch

SesMo Eq detector integrated seismic and heat detectors
The SesMo do not include any moving mechanical parts
The SesMo detector is suitable for gas and fuel stations - Stop pumps at earthquake
In gas stations used to automatic shut off valves at emergency
The SesMo Eq is an economical version in ABS enclosure
SesMo is a reliable detectors, without mechanical parts
Detects Z, vertical and horizontal ground movements (3-axis)
Based on ASIC processor with advanced signal analysis
SesMo Eq detector provides high sensitivity with very low false activation
With two independent relay contact outputs; Seismic and heat
ASIC Micro controller analyzes the detected signals
In case of seismic or heat detected SesMo goes into alarm mode
Clear visual signaling with three indication LEDs
Simple DIP Eight Switches Array for performance setting

Precise electronic filters prevent the SesMo Eq detector potential false alarms
due to environmental disturbance. Innovative detection technology! No false sessions!

Main Features

Enclosed in ABS housing
High immunity to false alarms
Low Standby current consumption only 25 mA
Advanced 3 axis sensor
Three Indication LEDs
Easy and fast installation

Technical

Seismic sensor: 3 Axis semiconductor
Heat sensor: Semiconductor (min. 75 °C, 167 ° F)
Processor: Digital ASIC
Applications: Indoor
Operating Voltage: 8.4 to 14V DC. For 24V special order
Current: 25 mA @ standby, 50 mA alarm
Relay: (2) N.C. mode, solid state, 50 mA @ 12V
RFI Protection: 30V/m @ 10–1000 MHz
EMI Protection: 50KV @ 1 mS lightning or surge
MTBF: 30,000 Hours
Detection: Seismic, heat
Indications: Three colored LEDs
Humidity: 80%
Operating Temp: -25 to +60 C° (-13 to 140° F)
Size: W=90, L=85, H=50 mm (3.55 x 3.35 x 2")