Sectional FRP water tank 5000 ltr price cheap
Panel water tank 5000 ltr price,Volume1-1000CBM
For WATER STORAGE TANK,SINTA can support you with 3 types of tanks which adopt different material: SMC(FRP,GRP) water tank, hot dipped galvanized water tank, and stainless steel water tank. If any item interests you,welcome here! Now the following is the overview for SMC(FRP,GRP) water tank!
SMC FRP GRP fibre water storage tanks
SMC(FRP,GRP) Water Storage Tank>>
What is SMC material?(SMC tank also called FRP,GRP tank)
1. Sheet Molding Compound is a fiber-reinforced material, which consists primarily of a thermosetting resin glass fiber.
2. SMC is a high tech material that is used in the manufacturing process in most of our products ranges.
3. The advantage of SMC include, high impact compressive, flexural and tensile strength along with temperature stability.
4. SMC has low profile, low shrink for excellent surface appearance and painting.it's color pigmentable and has excellent
chemical and electrical resistance varied to provide insulation, conductivity or anti static properties.
SMC FRP Water tank structure
The major advantage is light weight, anti-rusted, non-leakage, long durable time and easy to clean. It is widely used in hotel, school,hospital and coal mine enterprise.
SMC GRP storage Water Tank , is the name of the system in which high volumes of liquids (200000 liter, 300000 liter etc) can be stored. Panel water tank can be assembled in averywhere outdoors or indoors because it is delivered in unassembled form and it is assembled on field.
Main superiorites of Panel water tank are its being corrosion resistant, 4 seasons heat insulation, high impact resistance, water tightness, high volumetric tonnage and long life. Karmod is the correct address for SMC panel Tanks.
We developed blue color SMC FRP water tank as showing below:
Technical data for SMC FRP water tank:
| Material | GRP/FRP/SMC |
| Size | 1x1m, 1x0.5m, 0.5x0.5m |
| Panel Shape | Ball shape |
| Thickness | 4-16mm |
| Remarks | Thickness Tolerance: ±0.2mm |
| Volume | From 1m3 to 1000m3 |
| COLOR | White,Blue,and so on |
SMC water tank physical and chemical properties | ensile strength (Mpa)≥60 |
| Bending strength (Mpa)≥100 | |
| Bending modulus (Gpa)≥7.0 | |
| Pap hardness≥60 | |
| Bibulous rate,%≤1.0 | |
| Glass fiber content,%≥25 | |
| Leakage | No leakage after filled with water |
| Full of water deformation | Filled with water, wall maximum deformation after no more than 1.0% of the tank bottom center height, no more than 10 mm maximum deformation |
Accessory of smc frp panel water tank, FRP GRP fibre water storage tanks:
FRP GRP fibre water storage tanks can be used as:
- Potable Water Storage Tanks
- Rain Water Harvesting Tanks, Well Water Tanks, Sea Water Tanks
- Reverse-Osmosis Water Tanks (water with high or low conductivity)
- Fire Reserve Storage Tanks, Swimming Pool Balance Tanks
- Distillation and Process Tanks
- Septic Tanks and Sewage Tanks
- Industrial Process Tanks, Chiller Water Tanks, Cooling Tower Water Tanks
- Hot Water Storage Tanks and Chemical Substance Storage Tanks
- Agricultural Irrigation Tanks.
Details of China manufacture SMC/FRP/GRP combined panels drinking storage water tank
SMC FRP Panels for water tank:
Inside veiw of SMC FRP water tank:
Partial details of SMC FRP water tank:
Our Project for smc frp panel water tank:
SMC FRP Water Tank Installation:
TANKS FROM 1 TO 10,000M3 (260 – 2,500,000 USG)
Despite its’ great strength, GRP is lightweight – just 1/3 one third the weight of an equivalent steel panel.
All panels can be lifted by hand, with no special equipment required even where access is difficult, and installation can
progress quickly and efficiently.
Step 1. Install steel footings on leveled concrete foundations.
Step 2. Align GRP panels to be pre-assembled.
Step 3. Place rubber sealant from ready-to-use roll between panels.
Step 4. Connect panels with bolts and nuts.
Step 5. Position bottom panel sections, and finish up base of tank.
Step 6. Position three sides of the tank.
Step 7. Position and fix roof panels and if required, roof support pipes and plates.
Step 8. Install reinforcement if required.
Step 9. Close up the tank with the fourth side.
Step 10. Finish the internal or external reinforcement.
Step 11. Fill and test.
Packing of Panel Type Water Tank / Sectional GRP Panel Tank / Bolted Panel Water Tanks
Maintenance Manual for SMC(GRP) Water Tank
1.Maintenance Guide for Water Tank
1) Operation
a. Clean the tank regularly according to the water regulation.
(PS: Twice a year for cleaning, once a month for sanitation check)
b.Operate water in/out value slowly to prevent the impact on water tank by hammering effect when fill/drain water.
c.The tank room should be strictly off limits to anyone who is not an operator.
2. Special Instruction for Winter Season
1) Shut out the indraft of cold air into the tank-room.
2) In case of non-usage of water more than 1 week, drain the water completely from the tank to prevent freezing.
3) Check the insulation on inlet pipe.
4) Check the servomechanism, inlet/outlet pipe, etc. regularly.
Galvanized steel water tank and stainless steel water tank for option:
Galvanized steel water tank for option
We are Hebei Sinta Co., Ltd in the North of China, specialized in the manufactureing and exporting of water tank, mainly include SMC (FRP GRP tank),galvanized steel water tank, stainless steel water tank.
Our water tank is mainly exported to African friends for their water storage,especially galvanized steel water tank.The capacity can be 1 cubic meter -5000 cubic meter. We can also design the product according to your specific requirement.
We can provide you installation guide.If parts are damaged in the quality insurance period because of our quality,we can change the damaged parts free of charge.
Our company:
If you are intersted in our China manufacture SMC/FRP/GRP combined panels drinking storage water tank,welcome to contact us freely; Pls advise us the volume or dimension of the tank,so we could work out the best price for you soonest. Thanks!
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier