lime slurry pump are designed for continuously handing the most difficult higher abrasive slurries which contain too big solids. The lime slurry pump are casted as a single pump casing structure with smooth over-current channel.The overflow part is made of hard nickel and high chromium wear resistant alloy. The outlet direction of horizontal lime slurry pump can be adjusted according to the request direction. The lime slurry pump are suitable for delivering strong abrasive slurry containing bigger particles in mining, explosive sludge in metal melting, dredging and so on. The advantages of the horizontal lime slurry pump  are heavy flow, easy installation and operation, good performance of NPSH and abrasion resistance.

lime slurry pump diagram

Technical parameters of lime slurry pump

 The information in the table is not complete. Please click here to get more detailed data.

1. The lime slurry pump are horizontal, single pump casing structure horizontal pump.

2. Use special clamp clamping pump body and pump cover, the pump outlet can be adjusted in the any direction of 360 degrees, easy to install and use.

3. The bearing components with cylindrical structure, easy to adjust the gap between the impeller and the pump body to keep long working life.

4. Bearing with grease lubrication.

5.The lime slurry pump  have three kinds of shaft seal including packing seal, vice impeller seal, mechanical seal.

6. Wide flow channel , good cavitation performance, high efficiency, abrasion resistance.

7.Transmission methods are: V-shaped V-belt driven, flexible coupling driven, gearbox transmission, hydraulic coupling driven, thyristor speed control speed and so on.

8.Over-flow components Material: nickel-containing high-chromium wear-resistant alloy.

9.Using variety speed and variants, making the sand and lime slurry pump running in the best conditions.

10. Long working life and high operating efficiency can meet a variety of bad working conditions.

Sand lime slurry pumping, dredge river, mining and transport metal smelting. Flow range: 36-3800 m3/ h Head range: 3.5-80 m. Maximum through particle size: 254 mm. Maximum efficiency: 72% Cavitation allowance: 2-8 NPSH (r).

Zhejiang customers signed a dry land dredging project. The required transport distance is 1500 m -2000 m, and the soil contains stones, garbage, etc. Required pump-type has to be easy construction, with good passage capacity and long service life. Which also can pump sand 300 m3/h, with diesel engine as power.

According to the customer’s construction requirements and the similar construction design experience. We recommended that customer choose the lime slurry pump ZS300-50 operation. And supporting the high pressure water pump,which to provide high-pressure water to impact the soil layer to form the slurry supply for the big particle lime slurry pump.

lime slurry pump ZS300-50 parameters

lime slurry pump flow channel is wide. And it’s good passage performance. And with wearable alloy material of pump shell, impeller and safe guard, so it has long service life. After inspecting the pump construction site, checking our parts, pumps, and comparing our proposal with dredging pump machines from other supplier.The customer selected our lime slurry pump. After we shipped horizontal lime slurry pump ZS300-50 units to the customer’s site.The customer immediately installed it in the existing floating platform.

Then they began trial production. During the first trial production day, the mud production is 500 m3. But there are diesel smoking and litter problem.After the customer reflected the problem, our company immediately contacted with the construction workers. Then we found the customer failed to install the long-distance pipeline at the outlet of the horizontal lime slurry pump during the trial production.

There’s no demand for the lime slurry pump in actual head.So the pump flow rate increased, resulting in power demand exceeds of the diesel engine power.So then appeared black smoke, litter. We suggested customers to install the pipeline as soon as possible. The customer arranged immediately, and test the pump after the pipeline was installed. The failure before did not appear again. And the flow is 350 m³  when delivering 1,500 meters. Our customer is very satisfied with this.

Small sand pump

Heavy duty sand pump

Submersible Slurry Pump

Gravel pump

Slurry Pump

Vertical slurry pump

As the professional lime slurry pump and dredger designer, manufacturer and exporter, OCEAN Pump had been worked harder to become the leader to supply One Stop Sand Pumping Solutions to worldwide customers since 1997.  We have more than 30 talented sand pumping experts and strong teams responsible for product development, manufacturing, quality control, exporting, after sales service. We have our own manufacturing factory with professional technicians and advanced machines. By choosing OCEAN Pump, you choose a long term professional partner for your sand pumping business.

OCEAN Pump Factory is located in Taian City, the famous tourist city near the expressway from Beijing to Shanghai, Shandong Province, China. As the leading lime slurry pump machine designer and manufacturer, OCEAN Pump has its own 15,000 square meters state-of-art manufacturing factory. In recent years, we had invested more than 700,000 dollars into our modern manufacturing factory to improve the basic production facilities, working conditions, employee salary and welfare, technical and teamwork training, etc.

back to homepage