Gold Dredge Pump is designed for continuously handing the most difficult higher abrasive slurries which contain too big solids. The Gold Dredge Pump is casted as a single pump casing structure with smooth over-current channel.The overflow part is made of hard nickel and high chromium wear resistant alloy. The outlet direction of horizontal Gold Dredge Pump can be adjusted according to the request direction. The Gold Dredge Pump is suitable for delivering strong abrasive slurry containing bigger particles in mining, explosive sludge in metal melting, dredging and so on. The advantages of the horizontal Gold Dredge Pump  are heavy flow, easy installation and operation, good performance of NPSH and abrasion resistance.

Gold Dredge Pump diagram

Technical parameters of Gold Dredge Pump

 The information in the table is not complete. Please click here to get more detailed data.

1. The Gold Dredge Pump  is horizontal, single pump casing structure centrifugal pump.

2. Use special clamp clamping pump body and pump cover, the pump outlet can be adjusted in the any direction of 360 degrees, easy to install and use.

3. The bearing components with cylindrical structure, easy to adjust the gap between the impeller and the pump body to keep long working life.

4. Bearing with grease lubrication.

5.The Gold Dredge Pump  has three kinds of shaft seal including packing seal, vice impeller seal, mechanical seal.

6. Wide flow channel , good cavitation performance, high efficiency, abrasion resistance.

7.Transmission methods are: V-shaped V-belt driven, flexible coupling driven, gearbox transmission, hydraulic coupling driven, thyristor speed control speed and so on.

8.Over-flow components Material: nickel-containing high-chromium wear-resistant alloy.

9.Using variety speed and variants, making the sand and Gold Dredge Pump running in the best conditions.

10. Long working life and high operating efficiency can meet a variety of bad working conditions.

Sand dredge pumping, dredge river, mining and transport metal smelting. Flow range: 36-3800 m 3 / h Head range: 3.5-80 m. Maximum through particle size: 254 mm. Maximum efficiency: 72% Cavitation allowance: 2-8 NPSH (r).

Zhejiang customers signed a dry land dredging project. The required transport distance is 1500 m -2000 m, and the soil contains stones, garbage, etc. Required pump-type has to be easy construction, with good passage capacity and long service life. Which also can pump sand 300 m3/h, with diesel engine as power.

According to the customer’s construction requirements and the similar construction design experience. We recommended that customer choose the horizontal sand and Gold Dredge Pump ZS300-50 operation. And supporting the high pressure water pump,which to provide high-pressure water to impact the soil layer to form the slurry supply for the big particle Gold Dredge Pump.

Gold Dredge Pump ZS300-50 parameters

Gold Dredge Pump flow channel is wide. And it’s good passage performance. And with wearable alloy material of pump shell, impeller and safe guard, so it has long service life. After inspecting the pump construction site, checking our parts, pumps, and comparing our proposal with dredging pump machines from other supplier.The customer selected our horizontal gravel suction  pump. After we shipped horizontal Gold Dredge Pump ZS300-50 units to the customer’s site.The customer immediately installed it in the existing floating platform.

Then they began trial production. During the first trial production day, the mud production is 500 m3. But there are diesel smoking and litter problem.After the customer reflected the problem, our company immediately contacted with the construction workers. Then we found the customer failed to install the long-distance pipeline at the outlet of the horizontalgravel pump during the trial production.

There’s no demand for the Gold Dredge Pump in actual head.So the pump flow rate increased, resulting in power demand exceeds of the diesel engine power.So then appeared black smoke, litter. We suggested customers to install the pipeline as soon as possible. The customer arranged immediately, and test the pump after the pipeline was installed. The failure before did not appear again. And the flow is 350 m3 when delivering 1,500 meters. Our customer is very satisfied with this.

Small Gold Dredge Pump

Heavy Duty Gold Dredge Pump

Submersible Slurry Pump

Gold Dredge Pump

Slurry Pump

Vertical Gold Dredge Pump

As the professional Gold Dredge Pump and dredger designer, manufacturer and exporter, OCEAN Pump had been worked harder to become the leader to supply One Stop Sand Pumping Solutions to worldwide customers since 1997.  We have more than 30 talented sand pumping experts and strong teams responsible for product development, manufacturing, quality control, exporting, after sales service. We have our own manufacturing factory with professional technicians and advanced machines. By choosing OCEAN Pump, you choose a long term professional partner for your sand pumping business.

OCEAN Pump Factory is located in Taian City, the famous tourist city near the expressway from Beijing to Shanghai, Shandong Province, China. As the leading Gold Dredge Pump machine designer and manufacturer, OCEAN Pump has its own 15,000 square meters state-of-art manufacturing factory. In recent years, we had invested more than 700,000 dollars into our modern manufacturing factory to improve the basic production facilities, working conditions, employee salary and welfare, technical and teamwork training, etc.

Alisa Liu
Tai'an Ocean Pump Co.,Ltd

Tel:+86 538 8580022
Mobile/WhatsAPP: +86 18562320512

Wechat: +86 18031445040
Skype: oceanpump08
QQ:814872373 
Website: http://www.sandpumpmachine.com
                 http://www.sanddredgers.com
Address: Mingtang Road,Tai'an City,Shandong Province,China.