SY-B131 Universal Blood Plasma Thawer Machine Medical Blood Thawing Machine
Specification :
Blood soluble machine is divided into (water soluble) and(aerosol type),
water soluble blood soluble machine has the advantages of fast speed due to water soluble,
specific heat is high, in the use process, even open the door to cover, has much effect on the soluble time is not,even if the continuous slurry can reach satisfactory effect. Aerosol type blood soluble machine with the advantages of small power consumption, circulation device air cavity characteristic, the cavity temperature uniformity, meet the requirements of fast dissolving pulp.This machine adopts digital display, computer control,according to the different demand, any set temperature,temperature difference is not greater than ± 1 °C,supporting the installation of automatic swing system,automatic regulation of frequency, especially the fusion plasma, melting and swing at the same time, a few minutes can be used. To reduce the process, saving time for rescuing patients, is convenient for medical workers, is the ideal equipment of blood bank.
Two, multifunctional blood soluble machine technical parameters:
Temperature 37 ± 1 °C
Temperature control accuracy of ± 0.5 °C
The heating power below 1000W.
The thawing time, ≤ 10min
Pulp weight < 4.6.8.10.12 bag (100-200ml) (at the time of purchase option)
There is no removable stainless steel thawed blue 4.6.8.10.12. only (purchase option)
Equipped with automatic arms back and forth swing system80 times / min or automatic frequency
Digital temperature display, microcomputer control
Three, multifunctional blood soluble machine use method and the matters needing
Attention:
Usually the set temperature, can be long-term boot, when the swing switch is turned on,
set the frequency,automatic swing, swing out of turn off switch, save electricity, reduce mechanical wear.
Before use, must be the water to the water line, do not dry, in order to protect the heating pipe.
Along with the time increase, water tank water gradually evaporated,please check the water level (add water). To ensure the normal operation of the machine.
The set temperature: press the SET button can be set or check the temperature set point.
Click SET tube character start flashing, said instrument enter the set state,according to a key setting value increases, according to data or button will quickly change, again press the SET key to return to normal working condition of instrument temperature setting is completed, start the heating indicator light.
Set in advance: press the SET button 3 seconds to enter the inner parameter setting instrument.
The first appeared and flashing parameters namely stop ahead, ahead of the parameter to be careful adjustment, in order to reduce the temperature overshoot, instrument control heating out put in advance when to stop heating, when the temperature dropped to advance the began to heating, value in the set and advance range output (relay) is not working, this can reduce the number of relay to prolong the service life of relay. Example: if the set point is 50 °C, advance 0.5,instrument control heating to release relay 49.5.0, the temperature dropped to 50 °C -0.5 °C =49.5 °C relay. The times ahead more relay action less, ahead of the Congress to reduce the control precision. Adjust the advance parameters and press SET button 3 seconds instrument to a working state. (Note: set in advance to prevent heating stop after the warm stamping is too high and specially set, generally do not need to modify).
1, multi function solution without water slurry box before, do not power.
The exposed surface of the water heating pipe must not be used, otherwise the heating pipe will be burned or solder melt water leakage, electric shock.
2, the water tank water must be distilled water, well water, river water,
do not use water springs and other hard water, to prevent the heating pipe burst and affect the sensitivity of constant temperature.
3, the water before you should cut off the power supply.
4, when not in use, should be adjusted to the minimum temperature.
This product is one year free warranty, one year for any quality problem is responsible for repair and
maintenance services in all aspects of life, to provide technical support and maintenance.
Specific price and technical problems can call communication, will make the customer feel value for money!
1. We ship the Blood Plasma Thawer by air or sea for you.
2. Our Blood Plasma Thawer with standard export packing.
3. No matter what delivery way , all depending on your actual requirements.
1. For all your inquires about us or our Blood Plasma Thawer we will reply you in detail within 24 hours
2. We own professional team have professional attitude to recommend products and services,
introducing the Blood Plasma Thawer for you.
3. Our Blood Plasma Thawer have various type and function , We will recommend to you that according to your requirements ;
4. We offer OEM services. Can print your own logo on the Blood Plasma Thawer
5. We have very experienced engineers, can help you better use our Blood Plasma Thawer
Your satisfaction is our duty! It will be our great honor to serve you. We do hope we can offer you more help in medical field and build the long term business relationship with you.
Our Advantage:
1. Top Quality: We have strict quality control system and enjoy good reputation in the market.
2. Excellent Service: We treat clients as friend and aims at building long term business relatiionship.
3. OEM Accepted : We Can print your own logo on the products.
4. Unbeatable Price: We always ensure high price performance to benefit our customers.
5. Timely Delivery: Your order shall be shipped once finished .